MarStand Indicator Stand 815 MG with flexible stem
1 / 4Pages

- MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments 8-2 > Rugged base ensures both maximum stability and sturdiness Օ The upper side of the base has a convenient hand grip Moves easily over surfaces without vibration Օ Front of the base is ground to allow movement of the stand along edges and rules Stable due to the three point supportՕ Support arm can be fine adjusted Post and support arm are made from stainless steelՕ Indicator can be rotated through 90Ѱ > b 348 d a c e Total height Max. projection Post dia. Base Fine adjustment Weight Order no.* Order no.* with base of support arm surface range Mount dia. Mount dia. a b c d e 8H7 3/8 inch mm / inch mm mm mm mm mm kg 300 / 12 185 18 14 150 x 150 2 4.2 4413000 4413050 500 / 20蓓 200 25 18 190 x 180 2 9 4413001 4413051 750 / 30 230 35 25 190 x 180 2 10 4413005 4413052 > * excludes indicating instrument ӕ A stable Height Stand for electronic measurement, Fine adjustment in the base allows easy operator set-up, even at high magnification. Up to 3.8 mm / .150Փ adjustment when arms fully extended. Collar has Teflon bearings and metal-to-metal clamping.Օ Post is thermally isolated from heat transfer from the base. Arm lock is independent of the pivot lock.Օ Uses vertical lug mounting EHE-2056 Lever gage head mounts directly to arm (as shown) EHE-2048 Lever gage head requires an EAM-1071 adaptor CP-83 Extra arm and swivel clamp assembly (allows mounting two lever gage heads on one stand) > Total height with base Arm reach Post dia. force Base surface Fine adjustment range Order no.* mm / inch mm / inch mm / inch mm / inch mm / inch 530 / 20.8Փ 254 / 10 38.1 / 1.25ӓ 161.7 x 94 / 6.2 x 3.7 3.8 / 1.5ӓ 2400 > * excludes indicating instrument size="-1">

+ MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments 8-3 > with magnetic base > 40-23050-100 8 11 Support arm with two jointsՕ Base has a powerful ON/OFF permanent magnet Magnetic force is active across the surfaces and the V-shaped bottom plus the front of the baseՕ Post and support arm are made from stainless steel Support arm can be fine adjusted > 14 220 285 18 140 70 x 46 Total height V-way for Magnetic Fine adjust- Weight Order no.* Order no.* Order no. with base shaft dia. force ment range Mount dia. Mount dia. wooden mm / inch mm N mm kg 8H7 3/8 inch case 285...

- 8-4 MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments > with flexible stem Flexible in any direction, arm can be locked in positionՕ The sleeves and grounded steel balls of the stem are compressed with a strong steel cable Clamping force is adjustable Օ Base has a powerful ON/OFF permanent magnet Magnetic force is active across the surfaces and the V-shaped bottom plus the front of the baseՕ Support arm can be fine adjusted Indicating instrument can be rotated through ձ 90 > 34и8 270 7 M10 Total height V-way for Magnetic Fine adjust- Weight Order no.* Order no.*...

+ MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments 8-5 > For application in inspection equipment for conducting length and concentricity (run-out) tests > 50-200348 40-23050-10018 踸8 815 XN > 11 18 for mounting in a T-slot踕 Two joints Knurled nut for clamping to the postՕ Post and support arm are made from stainless steel With fine adjustment especially stable version withmounting threadՕ One joint Post and support arm are made from stainless steelՕ With fine adjustment > 285485 245 25 14 34踸8 Post height Order no. > 14 Order no. 4424000815 XMA > M16 64,5 10,5 17...