Mahr Federal Electronic Levels
8Pages

- + CATALOG ELECTRONIC LEVELS

2 Millimar. Electrical Length Measuring Machines - The accuracy of machine tools begins with proper levelness plus the relationship between the ways and the table. These relationships are critical during the manufacturing process. Once the level is zeroed, the instrument functions as a spirit level, and will check the overall levelness of the machine components to a very high degree of accuracy. Shown here are just a few of the many surfaces that can be checked on a machine tool using the Electronic Level. To aid in differential profiling applications, two level sensing heads, operating...

Millimar. Electrical Length Measuring Machines 3 + How They Work • Used to determine any deviation in the right angle relationship between a horizontal surface and the earth’s gravitational force (usually expressed as an angular or linear deviation from absolute level) • Show any change in this relationship over time. • Compare the orientation attitude of separate or adjacent horizontal surfaces • Show any change in this comparison over time. • Level systems are angular-linear compatible. As shown in the figure, our Sensing Head operates on the pendulum principle, with a pendulum supported...

4 Millimar. Electrical Length Measuring Machines - • Dynamics – simultaneously computes the minimum, maximum, T.I.R., nominal and actual gage head signal for dynamic measurement capability. • Multi-Range – three selectable ranges in inch or metric units. • Message Center – display provides a simple “menudriven” setup procedure in English, French or Spanish. • RS-232 Output – for communicating with Data Collection Devices. • Two Gage Head Input – Independent reading or for providing the capability of “summing” for diameter reading, matching clearances, runout and parallelism. • Angular units...

Millimar. Electrical Length Measuring Machines 5 + Order no. RS-232 cable, amplifier to MSP2 printer or computer, 2 m/ 6 ft 7024634 Storage Cover (opaque) – protection for the 832 Amplifier when used in harsh environments ECV-1276 Oil/Splash Cover (clear) –protection for the 832 Amplifier when used in harsh environments ECV-1285 Footswitch for SEND DATA, 3 m/ 10 ft cable (15 pin) ECB-1859 Remote pushbutton for SEND DATA, 1.5 m/ 5 ft cable (15 pin) ECB-1860 Battery Charger Modules (For 832 Units using 3 pin connector) Plug-in, 120 VAC, 50-60Hz charger for use with 120 Vac battery operated...

6 Millimar. Electrical Length Measuring Machines - Type Order no. Automatic Profiling System described above with 120 VAC 50/60 Hz power module EMD-832P-50-W1 Automatic Profiling System described above with 220 VAC 50/60 Hz power module (EU) EMD-832P-50-W2 Surface Plate Certification Software EDD-1035 The Differential Level System operates simultaneously with a single amplifier, permitting an immediate comparison between two surfaces. Adjustable bases permit setup on surfaces that are out-of-level or square by as much as ±1.5°. Each system includes: • 832 F Amplifier with power module and...

Millimar. Electrical Length Measuring Machines 7 + EAT-1055 (Vee Base) Has a 120° Vee precision ground into the 102mm/4 in base for measuring the straightness or alignment of cylindrical surfaces. EAT-1054 (Magnetic Base) Incorporates a magnet to fix it in position, providing stability when mounted on a moving carriage. Has two 152mm/6 in surfaces, accurately ground to 90°, to simplify measuring flatness on horizontal or vertical and cylindrical surfaces. Each adjacent pair of faces is square to within 0.5ìm/25 ìin. Attachment includes 120° Vee face, which is parallel to its base to the...

© 2005 Mahr Federal, Inc. We reserve the right to make changes to our products, especially due to technical improvements and further developments. All illustrations and technical data are therefore without guarantee. Mahr Federal, Inc. 1144 Eddy Street Providence, RI 02905 Phone: 1-800-343-2050, Fax: 1-401-784-3246 E-Mail: information@mahr.com - + WWW.MAHR.COM A-232 1205 5M