LIFTING TECHNOLOGY VS SQUARE II 6.5 MCVP 252286 The four post inground lift, with runway, lifts cars and vans of up to 6.5 t. The runway lift, with electro-hydraulic SQUARE lifting unit, is optimally suited for the quick lifting of vehicles. Thanks to the already present rails, an axle jack for wheel-free lifting can also be added to the runway for vehicles with a 5500 mm wheelbase. Optional: Conversion to vehicle reception, wheel alignment or inspection lift with axle play detector and 3.5 t wheel-free jack, as well as various types of installation (flush-mounted runway, with or without floor compensation). The torsion-resistant SQUARE posts guarantee maximum safety and outstanding tensile strength, which makes them ideal for wheel alignment. PRODUCT DETAILS/ACCESSORIES Four-post in-floor lift with driving platforms for cars Description of driving platform: • Driving platform length 4400 mm ideal for cars and small transporters • Ample freedom of movement below the lifting platform thanks to the compact post-lifting unit and resulting optimum lighting below the raised vehicle • Optional conversion to chassis measurement lift with precisely aligned driving platforms, sliding plates for tension-free wheel support, driving platform levelling and Displacement device with latch rail • Optionally prepared for wheel-free jack and level driving platforms with levelling plate sets • A high-quality powder-coated platform covering assists in corrosion protection and adds a significant upgrade in terms of appearance • Optional driving platform coating with granulate coating • Additional corrosion-resistanttreatment in the seam region and body cavity-sealing increases the service life • Pre-integrated compressed air connection and optional 230V/ 1PH energy supply in runways • All cables are protected inside the SQUARE post • Optional, no-dazzle rotatable LED lighting • Various assembly variants for optimum use: ° Driving platform resting on floor with low drive-on height and platform movement area with no tripping hazard edges ° Driving platforms flush with floor to facilitate driving onto the lift, no protruding assemblies in the lift area ° Driving platforms flush with floor to facilitate driving onto the lift, no protruding assemblies in the lift area with complete floor levelling of the platform movement area with no tripping hazard edges • Runways and ground levelling pre-equipped for the use of an optional axle lift • Pinch point and shear point protection thanks to CE stop SQUARE lift unit: • Outstanding rigidity and optimum safety thanks to torsion-resistant square post • Very quiet pump and very quiet electric motor in corrosion-proof oil-submerged design, optionally with bio oil • Electronic lift control with no-contact, wear-freelimit switches and visual error display • Very smooth running due to special long-life nickel coating on posts that promotes sliding, with robust, low-maintenance post design • Protected internal hydraulic safety cylinder guarantee lengthy service life • Mobile synchronisation and safety yoke for careful distribution of force in the post guide as standard • High lifting/lowering speeds are guaranteed (max. 38/38 s) • Lift system with synchronisation for electronic synchronism of the front and rear piston couple guarantees optimum precision of the front and rear piston couple • Battery-operated emergency lowering • Optimisation of workplace ergonomics mentioned thanks to optional, standard-independent control via traffic-light energy module or flush-mounted switching system • Driving platform 4400 mm powder-coated anthracite (RAL 7016) • Lift unit with hydraulic assembly • Ramps and drive-on plates -Rapid-action compressed-air coupling mounted on driving • Wiring and mounting material • Installation box/installation frame not included in delivery • Emergency DOWN cable for connection to switch box • Control unit with 4 x 10 m control cables (flexible oil cables) • Lockable master switch • Operating manual and test log

LIFTING TECHNOLOGY FOUR POST INGROUND LIFT TECHNICAL DATA Load capacity CE Dimensions of driving platform (L x W x H) Inner drive-through width Post dimensions, square Post spacing Post axle spacing in driving direction Installation depth Lifting/lowering time depending on load Hydraulic oil volume (not included) Operating pressure Drive power Power supply Runways with Granulate Coating -Extra Charge Wheel-Free Jack 3.5 for Four Post Inground Lift Rubber pads flat 100 x 150 x 20 mm (4 pieces) Rubber Chocks Set pyramidal h=80 mm, 120x120 mm (4 pcs.) MODEL: GK 12/8 set Rubber Chocks Set pyramidal...

LIFTING TECHNOLOGY FOUR POST INGROUND LIFT VT 998240 VT 998237 VT 998238 Internal transport -NORTHTwo-/Four-post lift with runways Internal transport -SOUTHInstallation tub (1 - 4 pcs) Internal transport -NORTHInstallation tub (1 - 4 pcs) MAHA SE & Co. KG / Hoyen 20 / 87490 Haldenwang / Germany Phone: +49 8374 585 0 / Fax: +49 8374 585 0 / [email protected] / www.maha.de Internal transport -SOUTHFoundation frame for runway Internal transport -NORTHFoundation frame for runway Packing Charges Four Post Inground Lift, Runway Type -within Europe-