MTL 15
MTL 15
- Independent operation with an optional power generator.
- Hydraulic lowering device with cable remote control for easy relocation.
- Includes an office with a PC workstation and optional air-conditioning.
- Hydraulically operated entry and exit ramps with weather protection roof.
- Optional 360° rotation device for positioning.
- Expandable with additional testing equipment (not included).
- Dimensions: 2590 x 2437 x 6056 mm.
- Weight: Approximately 12,500 kg.
- Drive-through width: Max 3624 mm; height: 4287 mm (extended roof), 1995 mm (closed roof).
- Track width: Min 880 mm, Max 2550 mm.
- Axle load: Up to 15 t depending on options.
- Power supply: 3/N/PE 400 V 50 Hz.
- Operational temperature: -10°C to +45°C, Humidity: 100%.
- Integrated Continuous Current Power Set, Air Conditioning, and Convenience Package available upon request.
- Special voltage options and a 360° rotating device for the container.
- Transport costs and on-site training for MTL 15 are additional.
Catalog excerpts
VEHICLE TESTING TECHNOLOGY The test container MTL 15 is fully self-sufficient due to an optionally available, fully integrated power generator. Equipped with a hydraulic lowering device, including cable remote control, the test system can be set up within 15 minutes and is ideal for relocation. • Completely independent, functioning test container thanks to fully integrated power generator (optional) • Hydraulic settling device incl. cable remote control, allows for easy change of location • Fully operational in under 15 minutes • Self-supporting 20 ft. steel container inspired by DIN ISO 668 • Office with PC workstation for staff • Hydraulically operated, granule-coated entry and exit ramps • Roof with weather protection can be lifted hydraulically • Air-conditioning with heating function for office (optional) • 360° rotation device for test container for easy positioning at location (optional) • Can be expanded to a complete test lane with: ° MINC II EURO side slip tester ° MSD 3000 shock absorber tester ° MBT 7000 RS 3 brake tester with weighing system up to 18 t axle load (for operation with integrated power generator, drive power max. 2 x 9 kW) ° LMS 20/2 axle play tester ° MLT 1000 / MLT3000 headlight tester ° MGT 5 / MDO 2-LON / MET-SERIES exhaust gas measuring instruments ° TWIN F IV 3.0 U MTL double scissor lift Attention: The above mentioned devices are not included in the scope of delivery • incl. installation of the test devices • Container cannot be stacked • Test containter MTL 15, installed and operational, including ordered test equipment Weight (operational) Drive-through width of the test chamber max. Drive-through height of the test chamber (extended roof) Drive-through height of the test chamber (closed roof) Min. track width of the vehicles to be tested Max. track width of the vehicles to be tested
Open the catalog to page 1
VEHICLE TESTING TECHNOLOGY MOBILE TEST LANE TECHNICAL DATA Axle load (depends on options) Power supply Ambient temperature Ramp slope Integrated Continuous Current Power Set -UPON REQUEST Air Condition for Office -UPON REQUEST Convenience Package -UPON REQUEST Horizontal 360° Rotating Device for Container SUPPLEMENTARY CHARGES VT 998084 Transport costs MTL 15 VM 995138 On-Site MTL 15 Training (3 Days) MAHA SE & Co. KG / Hoyen 20 / 87490 Haldenwang / Germany Phone: +49 8374 585 0 / Fax: +49 8374 585 0 / [email protected] / www.maha.de
Open the catalog to page 2All MAHA Maschinenbau Haldenwang GmbH & Co. KG catalogs and technical brochures
MLT 10002 Pages
MET 6.12 Pages
MSR 500/13 Pages
AIR 11 Page
3M SE-4021 Page
MINC I EURO1 Page
VS SQUARE II 6.5 MC3 Pages
AL II 2.01 Page
Archived catalogs
MLT-SERIES4 Pages
MLP 20002 Pages
E-BOX4 Pages
CONNECT Series8 Pages