MicroBlender?
2Pages

MAGUIRE WSB MB Micro Blender Product Technical Data Sheet Design The Maguire Weigh Scale Blender™ (WSB) range of gravimetric batch blenders are for all plastics converting businesses for all types of extrusion applications, and also all Injection and Blow Moulding applications. The WSB MB Blender consists of 4 removable hoppers fitted with materials dispense valves for metering all materials. Operation The Dispense Valves available are as follows; Corner Valve – high flow slide gate valve designed for poor flowing materials, Pivot Valve – 1.25” Control Pivot Valve designed to dispense free flowing The WSB Controller comes packed with standard granules, and Carousel Valve – slower operating features and functions that are unparalleled in dispense valve designed for very small settings the industry. between 0.2% to 1.0%. Key to this is the continuous calibration of materi- The standard Micro blender is equipped with 1 als ensuring accurate dispenses of every material Corner Valve for Regrind and 3 Pivot Valves for within the blend. Natural, Colour and Additives. The Controller every dispense updates the gram/ The hoppers are mounted above the Weigh Bin second flow rate of each material, ensuring con- with a default 400g batch size. sistent accuracy. In normal operation the system tares the weight Settings are made easily by either user friendly of the weigh bin and then each material is dis- thumbwheels, or entering settings directly on the pensed - Regrind, Natural, Colour and Additive in keypad. sequence, weighing each material after each dispense confirming material required before moving on to the next material. The complete batch is released into the mixing chamber, and mixed with the previous batch to ensure a homogenous mix. Material blending is controlled by a level sensor mounted in the upper part of the mix chamber. When the sensor is covered the blender will not dispense any further batches. The level of material in the mix chamber is critical to good mixing. As material in the mix chamber is consumed the sensor is uncovered and then the blender then commences the next cycle. For special functions these can be easily accessed and set via the password protected keypad. There is audible alarm and strobe light with silence function, should a batch be incomplete. Setup and Operation reports can be printed direct to a USB key. Data is also available allowing remote access and monitoring to download settings and check job progress. Integration to other control or ERP systems can be made by leading fieldbuses or OPC interfaces.

Product Technical Data Sheet Micro Blender _evsl Sensor Ideal for small processing machines Reduced weight and footprint Overall precision of ±0.1% of specified blend Compressed air gun for quick cleanout included Easy access to all material contact surfaces of the machine including hoppers, weigh bin, and mixing chamber permits rapid colour change Proprietary 12-12 microprocessor-control tech- nology monitors and confirms the weight of each ingredient (touch-screen optional). Compensation is made when a variation in dis- pense weight is detected Additional standby materials hopper...