Q MAGTRO L Note: Not available in U.S. ZS Series Load Cell FEATURES • 0.5 t to 5 t (2 kN to 50 kN) • Approved for use in calibrated weighing systems • High accuracy (C1, C3 or 0.1 and 0.05) • Hermetically-sealed housing (IP 67) • Made of stainless steel • Appliances for easy assembly • EU approval * DESCRIPTION The ZS load cells are made entirely of a special stainless steel and are, therefore, also suitable as weighing plants under difficult environmental conditions. The sensor element itself is fabricated as a transverse body. A metal diaphragm, which is welded on to the deformation zone protects the sensitive strain gauges from environmental influences. As a result constant measuring characteristics are ensured. Compensation and adjustment elements, which are required for the exact setting of the guaranteed technical parameters, are positioned in a special chamber, which is also sealed. The load cell can be subjected to traction or compression force. An assembly kit, which can be ordered separately, facilitates the unproblematic and safe installation of the load cell in the weighing unit. As a standard, the load cells are supplied with a 3 m long connection cable. Of course, these load cells, calibrated in Newton (N), can also be supplied as high-precision transducers up to the accuracy class 0.05%.

FORCE TRANSDUCERS / LOAD CELLS Accuracy class Test report No. D09-96for ZS 0.51, 1 t and 2 t nominal load According to VDI2637 " According to VDI 2638 ** Further nominal load and dimensions upon request Option: The transducers can be delivered with an internal amplifier delivering an output signal of 0(4) - 20 mA or 0 - 10 V within precision classes 0.2 and 0.5. Note: In the ZB-E type cells, the pins for supply voltage (-) and measuring voltage (-) are interconnected internally.

ZS with pendulum support, above AM 022 ZS with pendulum support, complete

Mechanical Accessories AA 12 (2 kN to 10 kN) • AA 20 (20 kN) • AA 25 (50 kN) ZS with flexible heads AM 068 ZS 0,5t to 2t with elastomer bearing

Mechanical Accessories AM 066 ZS 5t with elastomer bearing

ORDERING INFORMATION Explanation of Type Code (Ordering Example) for Force Transducers Flexible head with counter nut for ZS 2kN to 10kN Flexible head with counter nut for ZS 2t Flexible head with counter nut for ZS 5t Protection cable for ZS Force introduction calotte A12-50 for ZS 2kN to 10kN Pendulum support, above or below for ZS, incl. force introduction calottes Pendulum support for ZS, complete, incl. force introduction calottes Plate to weld on for pendulum support for ZS, above or below Assembly set for ZS 2kN to 10kN, max. transverse power <5kN Assembly set for ZS 2t, max. transverse...