Catalogs >
MAGTROL >
ZM Series

ZM Series
5Pages

Catalog excerpts

FORCE TRANSDUCERS FEATURES ▪ Nominal Force: 0.1 ... 100 kN ▪ Small size; ideal for space-saving applications ▪ Cost effective, high accuracy and long service reliability ▪ Damage-resistant (no mechanically sensitive parts) ▪ Construction with high-strength aluminum alloy or stainless steel ▪ Depending on the model, chemical resistant (suitable for moist environments and chemical plants) ▪ Protection Class: IP 65 or IP 67 ▪ Special designs available upon request DESCRIPTION DESCRIPTION Magtrol's ZM Series Force Transducers are designed to measure static and dynamic pressure forces. They are characterized by their small dimensions. Manufactured in stainless steel or high-resistance aluminum, these transducers can be used in a wide variety of applications. In particular, the stainless steel versions with a high degree of protection can be used everywhere without restriction, even in harsh environments. The sensor element consists of a diaphragm body equipped with metal foil strain gauges, which forms a hermetically sealed chamber filled with dry nitrogen. In standard mounting, the transducers are fixed with screws on a flat surface. The force is introduced vertically (without transverse force) via the universal ball joint, either directly or via a metal adapter interface. All Magtrol ZM Series transducers are supplied with a 1.5 m long connection cable with loose ends. Optionally, they can be supplied with a built-in amplifier (ZM‑E). Then, an Output Signals of 0 ... 10 V DC or 4 ... 20 mA can be selected. SYSTEM CONFIGURATION SYSTEM CONFIGURATION ZM Series Force Transducer LMU Series Load Monitoring Unit DATA ENTER AN Series Signal Conditioner & Display Programmable Logic Controller (not provided by MAGTROL) © 2023 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without fore

Open the catalog to page 1

TECHNICAL DATA - ZM ACCURACY CLASS a) MECHANICAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS Nominal Sensitivity (S) Relative Deviation of Zero Signal Max. Supply Voltage Input Resistance Output Resistance Insulation Resistance Connection Cable Supply+ Supply -Signal + Signal -Shield a) According to VDI 2637 b) % of Nominal Force (Fn) c) % of Nominal Sensitivity (S) d) Other length available on request. e) In the ZM-E sensors, the values for "Supply -" and "Signal -" are interconnected internally © 2023 MAGTROL | Due to continual product development, Magtrol reserves the right to modify...

Open the catalog to page 2

TECHNICAL DATA - ZM-S ACCURACY CLASS 1 MECHANICAL CHARACTERISTICS a) % of Nominal Force (Fn) c) Other length available on request © 2023 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning. DATASHEET www.magtrol.com

Open the catalog to page 3

NOTE: 3D STEP files of most of our products are available on our website: www.magtrol.com ; other files are available on request. © 2023 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning. Page 4 / 5

Open the catalog to page 4

ZM SERIES SYSTEM OPTIONS AND ACCESSORIES PENDULUM SUPPORT □L Lorem ipsum As mechanical accessory, the AM Pendulum Support avoids side load introduction and deformation due to high surface pressure. These support are only compatible with ZM Series transducers. □ L Each unit contains DIP-switches and jumpers for greater flexibility and complete adaptability. User-defined alarm limits can be configured into the unit, which when combined with our sensors, provides a safe and rugged measurement system that continuously monitors for short-circuits and interrupted signal lines. Magtrol LMUs are...

Open the catalog to page 5