TRACTION FORCE TRANSDUCER FEATURES ▪ Nominal Load: 10, 25, 50, 75 or 100 kN ▪ Pendulum Bearings maintenance-free ▪ Large safety also for long-term dynamic requests ▪ Large Overload Capacity ▪ High Precision ▪ Excellent long-term stability ▪ Protection class: IP 65 Fig. 1: ZL-03-10 | Traction Force Transducer The Magtrol ZL-03 Traction Force Transducer work with the Strain Gauge Technologie and was elaborate to support the load for long-term dynamic requests. Connected to a conditioning electronic, the transducer will give signal proportional to the measured load. The compact design along with the hight protection class issue to this transducer an excellent applicability to measure and monitoring the forces on crane cables, overload protection for elevators, along with all other load measurements in different environments. SYSTEM CONFIGURATION Traction Force Transducer Load Monitor Unit Strain Gauge Amplifier Custom Strain Gauge Amplifier DATA ENTER AN Series Load Monitor Signal Conditioner / Display NOTE: All values are in metric units. Dimensions are in millimeters. NOTE: 3D STEP files of most of our products are available on our website: www.magtrol.com other files are available on request. © 2022 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.

ZL-03 SERIES SPECIFICATIONS MODEL LOAD MEASURMENT Nominal Load (NL) Overload Admissible (% of NL) Combined Error (non linearity + hysteresis) ELECTRICAL CHARACTERISTICS Nominal Sensitivity Bridge Impedance Input Bridge Impedance Output Isolation Resistance Surface protection Power Supply ENVIRONMENT Nominal Temperature Operating Temperature Temperature coefficient of signal zero per 10 K for nominal / for operating temperature range Temperature coefficient of sensibility per 10 K for nominal / for operating temperature range ELECTRICAL CONNECTION Connector Cable assembly (option) cable lenght...