Catalogs >
MAGTROL >
WB23 & WB27

WB23 & WB27
7Pages

Catalog excerpts

HIGH-SPEED EDDY-CURRENT DYNAMOMETERS MAGTROL offers 3 types of dynamometer brakes to absorb load: Hysteresis (HD Series), Eddy-Current (WB Series) and Magnetic Powder (PB Series). Each type of Dynamometer has advantages and limitations and choosing the correct one will depend largely on the type of testing to be performed. With over 50 standard models to choose from, Magtrol Sales professionals are readily available to assist in selecting the proper Dynamometer to meet your testing needs. FEATURES ▪ Torque: 80 mN·m and 150 mN·m ▪ Speed: up to 100 000 rpm ▪ Power: 250 W continuous; up to 500 W (WB 23) or 1 kW (WB 27) intermittent ▪ Low inertia ▪ Very low residual torque ▪ Stable and smooth braking torque ▪ Measuring system with air-bearing ▪ Data acquisition via DSP 7000 Controller and M-TEST Software ▪ Built-in electronics with Torque & Speed measurement Fig. 1: WB 23 Eddy-current Dynamometer with AMF-1 (Adjustable Motor Fixture optional) and protection cover (optional) OPERATING PRINCIPLES Magtrol’s WB 23 and WB 27 Eddy-Current Dynamometers are designed for very-high-speed motors and dental or surgical tool testing applications. By providing a braking torque that is proportional to the rotational speed, rated torque is reached at the rated speed. The WB 23 and WB 27 Eddy-current Dynamometer provides their full braking power at high speed. This type of brake has been specially designed to test motors rotating at speeds up to 100 000 rpm, with the braking torque dependent upon the rotation speed. Due to its 2 PPR encoder, the system is not adapted to accurate close loop control below 10 000 rpm. The Dynamometers feature a low level of inertia, due to small rotor dimensions, and brake cooling is provided by air flow inside the dynamometer housing. A PT temperature sensor continuously monitors the brake temperature and alarms the DSP 7000 Controller to stop the brake excitation current in order to protect the dynamometer from overheating. The dynamometer include air bearings for minimizing friction and assuring best possible torque reading accuracy. It is mandatory to connect the air input through the air filtering and drying kit (included). Torque is measured by a reaction torque transducer placed on the stator. The dynamometer has a torque measuring accuracy rating of ± 0.2 % full scale. The speed is measured by an optical sensor and a 2 PPR (Pulses Per Revolution) encoder. This sensor measures speeds between 10 000 rpm and 100 000 rpm with a full scale accuracy of ± 0.06 % (using a DSP 7000). © 2020 MAGTROL | Due to continual product development, Magtrol reser

Open the catalog to page 1

WB 23 & WB 27 M-TEST MOTOR TESTING SOFTWARE Magtrol M-TEST is an advanced motor testing software (Windows® based) for data acquisition. Used with a Magtrol Programmable Dynamometer Controller (i.e. DSP 7000), M‑TEST works with any Magtrol Dynamometer or In-Line Torque Transducer to help determine the performance characteristics of a motor under test. Up to 63 parameters are calculated and displayed utilizing M‑TEST’s feature-rich testing and graphing capabilities. An integral component of any Magtrol Motor Test System, M-TEST performs ramp, curve, manual, pass/fail, coast and overload to...

Open the catalog to page 2

Open the catalog to page 3

Open the catalog to page 4

WB 23 & WB 27 WITH SHORT BASE PLATE WB 23&WB 27 AIR INLET (Filtering and drying kit included) MAGTROL MOTORTESTING & SENSORS WB 23 & WB 27 WITH LONG BASE PLATE 450 MAGTROL MOTORTESTING & SENSORS NOTE: 3D STEP files of most of our products are available on our website: www.magtrol.com ; other files are available on request © 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning. Page 5 / 7

Open the catalog to page 5

Polycarbonate glass protections AMF-1 Adjustable Motor Fixtures AIR INLET (Filtering and drying kit included) Cable passing slot (both side) NOTE: 3D STEP files of most of our products are available on our website: www.magtrol.com ; other files are available on request. ORDERING INFORMATION ORDERING NUMBER 1 : WB 23 2 : WB 27 2 : Short Base Plate 3 : Long Base Plate WB 23 or WB 27 with protection cover, base plate with/without motor fixture AMF-1 Example: WB 23 Eddy-Current Dynamometer with short base plate would be ordered as : 316-102-000-XXX. © 2020 MAGTROL | Due to continual product...

Open the catalog to page 6

WB 23 & WB 27 SYSTEM OPTIONS AND ACCESSORIES Magtrol’s Model DSP 7000 High Speed Programmable Dynamometer Controller employs state-of-the-art Digital Signal Processing Technology to provide superior motor testing capabilities. Designed for use with any Magtrol Hysteresis, Eddy-Current or Powder Dynamometer, Magtrol In-Line Torque Transducer or auxiliary instrumentation, the DSP 7000 can provide complete PC control via the USB or optional IEEE-488 or RS-232 interface. With up to 500 readings per second, the DSP 7000 is ideally suited for both the test lab and the production line. 7500...

Open the catalog to page 7