Catalogs >
MAGTROL >
TAB Series | Dynamometer Tables

TAB Series | Dynamometer Tables
3Pages

Catalog excerpts

DYNAMOMETER TABLES FEATURES ▪ Easy Mobility: Casters, which incorporate a highgrade nylon wheel with a die-cast aluminum frame, provide 360° rotation ▪ Sturdy Construction: Made from extruded aluminum, the dynamometer table is lightweight, strong and corrosion-resistant ▪ Leveling Jacks: When at rest and in operation, hand-operated leveling jacks, with rubber pads for vibration control, lift the casters from the floor to provide a solid foundation ▪ Versatile: Its industry accepted T-slot extrusions accommodate standard fractional or metric fasteners allowing easy reconfiguration ▪ Blower Mounting: To accommodate blowers required for brake cooling of certain HD/ED Dynamometers, tables are drilled and tapped for convenient blower mounting underneath the table top. ▪ Built-in Shelf: For calibration beam, tools and accessories. Also used for mounting of TSC 401 Torque-Speed Conditioner and DES 31X Power Supply (for tables ordered with WB/PB Series Dynamometers). Fig. 1: TAB 0800L basic table with dynamometer base plate also serving as table top CUSTOM TABLE OPTIONS ▪ 19” Rack Mounts: Can be added for dynamometer controllers, readouts, power analyzers and other supporting electronics ▪ Table Height: Choose from 2 different working heights to allow testing from either a standing or seated position ▪ Locking Drawer: Ideal for a laptop computer ▪ Built-in Cabinet: For storage of tools and accessories Test from a stationary position or move a dynamometer to alternate testing stations with ease with Magtrol’s Dynamometer Table. The stand is designed from lightweight aluminum with casters for smooth mobility, and is sturdy enough to support even the heaviest of Magtrol dynamometers. The design can be retrofitted to any Magtrol dynamometer and is easily reconfigured for added versatility. ▪ Fixtures and Protective Covers: Can be added to any basic table at an additional cost. Some assembly required. ▪ Multiple Dynamometers: Up to 3 sets of mounting holes can be drilled and tapped to accommodate up to 3 dynamometers, depending on the model © 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.

Open the catalog to page 1

TAB MODEL COMPARISON TABLES FOR HD/ED DYNAMOMETERS TAB 1457S For HD-100, 400, 500 and 700 Series Dynamometers with short base plate and ED‑715 Dynamometers a) For HD-100, 400, 500 and 700 Series Dynamometers with long base plate For HD-800 Series Dynamometers with long base plate and ED-815 Dynamometers a) For HD-825 Dynamometers with long base plate Grooved table top with five 10 mm T‑slots: one centered, two Mounting holes are pre-drilled and Base of dynamometer also serves 250 mm apart and two 350 mm tapped. as the table top. apart. Grooved table top with three 12 mm T-slots: one...

Open the catalog to page 2

© 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning. DATASHEET MAGTROL INC 70 Gardenville Parkway Buffalo NY 14224 | USA MAGTROL SA Route de Montena 77 1728 Rossens | Switzerland Offices in: Germany France - China - India Worldwide Distribution Network

Open the catalog to page 3