*mydirectindustry

Catalogs
MAGTROL
SK-01 Series

SK-01 Series

Product catalog summary

Overview: The SK-01 Series Clamping Force Transducers by Magtrol are designed for measuring clamping forces in applications such as lifts and ski-lifts. They utilize strain gauge technology and are available in two models with nominal forces of 300 kN and 400 kN.

Features:

Nominal Force: 300 kN and 400 kN
Accuracy Class: 3%
Stainless Steel Design
Temperature Compensated
Optional Amplifier and Display
Protection Class: IP 66
Adaptable for rope diameters from 28 to 95 mm

Specifications:

Nominal Load: 300 kN or 400 kN
Accuracy Class: 3%
Admissible Overload: 120%
Overload Limit: 150%
Nominal Sensitivity: 0.7 mV/V
Input/Output Resistance: 3500 Ω
Supply Voltage: Max 20 V DC
Operating Temperature: -10 °C to +60 °C
Protection Class: IP 66

Electrical Connection: The transducer uses a shielded cable with a standard LEMO connector. The cable is 3 meters long, and the shielding is not connected to the transducer body.

Dimensions: The dimensions vary slightly between the 300 kN and 400 kN models, with specific measurements provided for each.

System Options & Accessories: The SKG-01 Digital Amplifier & Display can be used with the transducer, providing additional measurement capabilities and outputs.

Ordering Information: The transducers are ordered by specifying the model number, such as SK-01-300 for the 300 kN model.

Contact Information: Magtrol Inc. and Magtrol SA provide contact details for further inquiries, with offices in the USA, Switzerland, and other countries.

Catalog excerpts

CLAMPING FORCE TRANSDUCERS FEATURES ▪ Nominal Force : 300 kN and 400 kN (other nominal force available on request) ▪ Accuracy Class: 3 % ▪ Stainless Steel Design ▪ Temperature Compensated ▪ Amplifier and Display (optional) ▪ Protection Class: IP 66 ▪ Mechanical adaptation for different diameters (rope with diameter 28 ... 95 mm) The Clamping Force Transducer SK-01 from MAGTROL is based on strain gauge technology. It is ideal for the control of ropes, brake clamps and similar devices. It measures the clamping force, independent of the clamp, on the longitidunal axis of the transducer. The SK-01 is available in two different ranges. One for ropes with diameter 28 47 ... mm and forces up to 300 and the kN second for diameter 48 ... 92 mm with forces up to 400 kN. When connected to a SKG-01 Digital Amplifier, the SK-01 is ideally suited for measuring the clamping force on lifts, ski-lifts and similar applications The capability of this device was tested by Empa (Swiss Federal Laboratories for Materials Testing and Research), see «Prüfbericht Nr. 169 166 from 16 July 1997». SYSTEM CONFIGURATION DATA ENTER Clamping Force Transducer Load Monitor Unit SKG-01 Digital Amplifier & Display Strain Gauge Amplifier Clamping Force Transducer Custom Strain Gauge Amplifier (not provided by MAGTROL) © 2022 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning. DATA ENTER AN Series Load Monitor Signa

Open the catalog to page 1

MAGTROLSPECIFICATIONS_ MODEL View from outside Power -Power + Signal -Signal + a) Shielded connection with cable 3m length. The shielding is not connected to the transducer body. © 2022 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning. DATASHEET www.magtrol.com

Open the catalog to page 2

SK-01 SERIES SYSTEM OPTION & ACCESSORIES MEASUREMENT CHARACTERISTICS Range Operating Temperature Temperature Coefficient Storage temperature Relative Humidity ELECTRICAL CHARACTERISTICS Voltage requirements Transducer voltage Maximum value input Analog output TARE button DATA ENTER Connector to plug SK-01 Analogue Outputs Switch ON/OFF Power supply ORDERING INFORMATION ORDERING NUMBER 300, 400 : Model number Digital Amplifier & Display © 2022 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning. DATASHEET MAGTROL INC 70 Gardenville...

Open the catalog to page 3

SK-01 Series

SK-01 Series

Catalog excerpts

All MAGTROL catalogs and technical brochures

Archived catalogs