PORTABLE SENSOR DISPLAY FEATURES ▪ 0.01% Accuracy ▪ Rigid Versatile Handheld Instrument ▪ Min.-Max. Value Display (Peak & Valley) ▪ 16 Programmable Measurement Ranges ▪ Measuring Rate up to 1 600 values per second ▪ Connection to any type of Strain Gauge Transducers ▪ USB 2.0 Interface ▪ Battery-powered or USB-powered Device ▪ Display Units ▪ Character Height: 14 mm ▪ Can be programmed directly on the device or by software (provided). DESCRIPTION The PSD Portable Sensor Display from Magtrol is a very compact, light and easy to use device. This amplifier can process sensor strain gauge signals ±0.3 … 5 mV/V. High measuring accuracy, paired with fast measuring rates allow an internal resolution of 22 bits at 2 mV/V. It also stores the adjustment data, sensor designation and physical unit. Functions, such as TARE, recall of min.-max. value,... are available during the measurement. The device is powered by 3 AA batteries or via its USB Mini-B port. In order to increase its duration of use, the PSD integrates an automatic standby mode which is activated when the device is not used. Fig. 1: PSD | Portable Sensor Display PSD PORTABLE SENSOR DISPLAY The PSD Display can be used with many sensors such as force sensors, load cells, torque sensors, anchor sensors or any other type of strain gauge transducers. This portable measurement and display system is particularly suitable in cases where a fixed installation is difficult or irrelevant, such as: ▪ Maintenance of installation ▪ Intermittent monitoring ▪ Laboratory, Research and development,... ▪ Installation or monitoring in civil engineering,... © 2021 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.

PSD SPECIFICATIONS MEASUREMENT Measuring accuracy class Input Signal Range Input Impedance Range of Strain Gauge Bridge > 150 Ω (2 parallel strain gauge full bridge / 350 Ω) up to 2 000 Ω Excitation Voltage (full bridge) Relative Linearity Error a) Noise (at measurment rate) a) Temperature Effect (on zero Signal) DISPLAY Type 5-digit LCD graphic display, 128 x 64 pixel, illuminated Display Range Display Additional Mode Meas / min / max value, overload, units, charge of battery Display Rate Scaling Point for Linearization Measuring Rate (average value) Measured Value Transmission via USB max....

PSD RELATED PRODUCTS As presented in «System Configuration», the PSD can be used with many of Magtrol's products, as well as with any third party manufacturer's sensors that base their measurement system on strain gauge technology. MB-02 SERIES - MINIATURE LOAD PINS Magtrol MB-02 Series Miniatures Load Measuring Pins are used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s MB-02 Series...

PSD ACCESSORIES CONNECTION CABLES ORDERING INFORMATION FOR CABLE ORDERING NUMBER 1 : Cable for HRL Series 2 : Cable for MB-02 Series 3 : Cable for SG-01 Axial Connector 6 poles Connector LEMO HRL Series Anchor Load Cell Example: Connection cable for HRL Series would be ordered as follows: 944-101-000-01X CONNECTOR Axial Connector 6 poles Axial Connector 6 poles Connector LEMO MB-02 Series Miniature Load Pins Axial Connector (only) Supply Supply + N/C Signal + Signal N/C Shield The portable PSD display can be used with many strain gauge bridge sensors. For use with a Magtrol sensor not listed...