M AGTROL 5241 Data Sheet Model 5241 Power Amplifier DESCRIPTION The Model 5241 is a voltage-controlled power amplifier designed exclusively for Magtrol’s Model HD‑825 Hysteresis Dynamometer. Because of its double braking system, the HD‑825 requires more than 4 amps of power in order to reach full torque. The 5241 (which can provide up to 5 amps of output current) is necessary in order to amplify the power between a 6200 or DSP6001 Controller (which both have a maximum current output of 1 amp) and the HD-825 Dynamometer. front panel ORDERING INFORMATION If the HD-825 is purchased without a dynamometer controller, please inform Magtrol of your controller model—as it may be necessary to modify your existing controller so that it functions properly with the 5241 Power Amplifier. rear panel SPECIFICATIONS ELECTRICAL CHARACTERISTICS 0 to 5 A DC Current Output 0 to +3 V DC or 0 to -10 V DC Control Input Brake: UL/CSA 6.3 A IEC 5 A Fuses (5 × 20 mm) Power (120 V): UL/CSA 3 A Power (240 V): IEC 1.25 A 330 VA Power Requirements Voltage Requirements 120/240 V 60/50 Hz 125 V 250 V 250 V 250 V SB T SB T DIMENSIONS Width Height Depth with handles Weight 19.00 in 7.00 in 14.74 in 16.38 in 29.66 lb 483 mm 133 mm 375 mm 416 mm 13.45 kg SYSTEM CONFIGURATION HD-825 Hysteresis Dynamometer 2-Pin Dynamometer Brake Cable MODEL 5241 POWER AMPLIFIER P/N 88M070-0150 (included with dynamometer) Control Input Brake BNC Cable P/N 88M086 (included with power amplifier) DSP6001 Dynamometer Controller 14-Pin / 14-Pin Instrument Cable P/N 88M007-0150 (included with dynamometer) MAGTROL INC 70 Gardenville Parkway Buffalo, New York 14224 USA Phone: +1 716 668 5555 Fax: +1 716 668 8705 E-mail: [email protected] MAGTROL SA Route de Montena 77 1728 Rossens / Fribourg, Switzerland Phone: +41 (0)26 407 3000 Fax: +41 (0)26 407 3001 E-mail: [email protected] Subsidiaries in: Germany • France China • India Worldwide Network of Sales Agents 5241-US 05/12 www.magtrol.com