*mydirectindustry

Catalogs
MAGTROL
Models 5500 / 5501 Manual Dynamometer Switch Boxes

Models 5500 / 5501 Manual Dynamometer Switch Boxes

Product catalog summary

Description: Magtrol Models 5500 and 5501 are manually-operated switch boxes designed to connect up to three Magtrol Dynamometers to a single controller. This setup allows for easy interfacing without the need to disconnect and reconnect cables. For WB Eddy-current or PB Powder Brake Dynamometers, both 5500 and 5501 are required, while HD or ED Hysteresis Dynamometers only need the 5500.

Specifications: The 5500 switch box has dimensions of 190 mm width, 248 mm depth, and 70 mm height. It supports up to three HD/ED Series Dynamometers and connects to a DSP7000 Controller using included cables.

Ordering Information: The 5500 is used for HD/ED Hysteresis Dynamometers, while both 5500 and 5501 are needed for WB Eddy-current and PB Powder Brake Dynamometers.

Configuration: The 5500 uses a 2-pin brake cable and a 14-pin signal cable, while the 5501 uses a 15-pin signal cable. Both models connect to various components like the DSP7000 Controller and TSC 401 Conditioner.

Contact Information: Magtrol Inc. is located in Buffalo, New York, USA, with subsidiaries in Germany, France, China, and India. Contact details include phone numbers and email addresses for both the USA and Switzerland offices.

Catalog excerpts

Models 5500 / 5501 Manual Dynamometer Switch Boxes-1

DESCRIPTION Magtrol Models 5500 and 5501 are manually-operated switch boxes that permit the connection of up to three Magtrol Dynamometers to a single dynamometer controller. Use of the switch boxes facilitates quick and easy interfacing of multiple dynamometers without the necessity of disconnecting and reconnecting the brake and control cables. For Magtrol WB Eddy-current or PB Powder Brake Dynamometers, BOTH a 5500 AND a 5501 Switch Box are necessary. Magtrol HD or ED Hysteresis Dynamometers only require the 5500. 5500 REAR PANEL 5501 REAR PANEL up to 3 (A-B-C) HD/ED Series Dynamometers magtrol SA Route de Montena 77 1728 Rossens / Fribourg, Switzerland Phone: +41 (0)26 407 3000 Fax: +41 (0)26 407 3001 E-mail: [email protected] 14-pin signal cable* (COMMON to TSC1) Subsidiaries in: Germany • France China • India Worldwide Network of Sales Agents

Open the catalog to page 1

All MAGTROL catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list