Catalogs >
MAGTROL >
MODEL 7500 | Power Analyzer

MODEL 7500 | Power Analyzer
4Pages

Catalog excerpts

POWER ANALYZER FEATURES ▪▪ Single/Three-Phase Capabilities: For single (7510) or three-phase (7530) power measurements ▪▪ Ranges: Up to 600 Vrms @ 20 A continuous duty ▪▪ Interfaces: USB & GPIB/IEEE-488 & Ethernet ▪▪ CAT II 1,000 V inputs ▪▪ Data Transfer Rates: Up to 100 per second Fig.1 : 7500 Series Power Analyzer ▪▪ Accuracy: Up to 0.1% ▪▪ Vacuum Fluorescent Display: High-quality, easyto-read, customizable readout displays volts, amps, power and power factor ▪▪ Measurement: Continuous or cycle-by-cycle ▪▪ Input Power: Accepts 85/264 Vrms, 60/50 Hz power at 20 VA max ▪▪ Auto Ranging: Automatically scales instrument for most accurate range ▪▪ Isolation: 1000 Vrms to earth, 750 Vrms line-to-line ▪▪ Average: Displays running average of amps, volts and watts ▪▪ Peak Hold: Stores the highest value read. Values can include amps, watts and volts in any combination ▪▪ Office Equipment ▪▪ Power Tools ▪▪ Calibration of Test and Measuring Instruments The 7500’s data transfer rate makes it ideal for both static and dynamic tests. ▪▪ External Shunt Input ▪▪ Calibration Certificate: NIST Traceable ▪▪ Rack Mounting: 19” (482.6 mm) with handles DESCRIPTION The Magtrol 7500 Series Power Analyzer is an easy-to-use instrument ideal for numerous power measurement applications. From DC to 80 kHz AC, the 7500 measures volts, amps, watts, volt-amps, frequency, crest factor, Vpeak, Apeak and power factor in one convenient display. They may be used either as stand-alone instruments or in conjunction with any Magtrol Hysteresis, Eddy-Current or Powder Brake Dynamometer; any Magtrol Dynamometer Controller and M-TEST Software for more demanding motor test applications. © 2017 MAGTROL | Due to continual product development, Magtro

Open the catalog to page 1

7500 SERIES SYSTEM CONFIGURATIONS DSP7001 Dynamometer Controller Motor Under Test Magtrol Dynamometer AC/DC Input Power MODEL 7530 THREE PHASE POWER ANALYZER RS-232 or GPIB Appliances, Ballasts, Drives, etc. AC/DC Input Power MODEL 7510 SINGLE-PHASE POWER ANALYZER FRONT PANEL Ready for Rack Mounting Custom Display Setup Phase and Summation Data Current Readings (DC, RMS, Peak, Crest Factor and Peak Hold/Inrush) Current Auto Ranging Voltage Readings (DC, RMS, Peak, Crest Factor and Peak Hold/Inrush) Voltage Auto Ranging Continuous or Cycle-by-Cycle Measurement Mode BACK PANEL Current Input...

Open the catalog to page 2

7500 SERIES SPECIFICATIONS VOLTAGE INPUT Ranges CURRENT INPUT EXTERNAL SENSOR INPUT 750 V AC/DC terminal (V) to terminal (±) and 1000 V AC/DC terminal to earth ground 1000 V AC/DC terminal to earth ground Crest Factor 1.7 @ full scale input 2.7 @ full scale input 2.4 @ full scale input 5 digits with 1 µV resolution 5 digits with 1 mW resolution Maximum Voltage Display Range 5 digits with 1 mV resolution 5 digits with 1 mA resolution ±((0.015 × F(kHz)% Reading) + 0.3% Range) ±((0.015 × F(kHz)% Reading) + 0.3% Range) N/A (measurement band limited to DC–80 kHz) V1, A1, V2, A2, V3, A3 (For Vx...

Open the catalog to page 3

7500 SERIES OPTIONS AND ACCESSORIES EXTERNAL SHUNTS/SENSORS If currents continuously reach above 20 amps, an external sensor must be used. Magtrol offers three different types of external shunts for use with Magtrol Model 7500 High-Speed Power Analyzer. Rated Current The HA Series shunt, designed for power cable hook-up utilizing 3/8-16 screws, has an insulating base and can be mounted on conductive surfaces. The LAB Series shunt also comes with an insulating base, along with thumb screws for the power leads and knurled nuts on the sensing terminals. The FL Series is a relatively small bus,...

Open the catalog to page 4