M-TEST 7 | Motor Testing Software
4Pages

{{requestButtons}}

Catalog excerpts

M-TEST 7 | Motor Testing Software - 1

MOTOR TESTING SOFTWARE NEW FEATURES WITH M-TEST 7 ▪▪ New Graphical User Interface has user friendly tabbed pages for quick navigation. ▪▪ Optional Analog and Digital I/O provides more device flexibility. ▪▪ DSP7000 Programmable Controller Support. ▪▪ Supports the optional Analog and Digital I/O Modules on the DSP7000 Programmable Controller. ▪▪ Compare function allows overlay of data from five separate tests on the same graph. ▪▪ Expanded power analyzer and power supply selections. ▪▪ Cursor tools can obtain the X and Y coordinates of any point on a curve and magnify any section of the graph. ▪▪ Additional test choices (coast and overload to trip). ▪▪ Programmable analog and digital outputs per step in curve and pass/fail tests. ▪▪ Export graph images to clipboard or file. ▪▪ Two page report generates a five-axis graph on second page. Fig.1 : M-TEST 7 Motor Testing Software Magtrol can also make custom modifications to the software to meet additional motor testing requirements. ANALOG INPUT MEASUREMENT Up to 128 thermocouples or analog sensors can be read and monitored during a motor test. Heat rise curves on the bearings, windings and housing of a motor can be performed and air flow/ exhaust efficiencies can be measured with an air tool or internal combustion engine. M-TEST 7, with its complete dynamometer control, even allows for analog measurement while performing load simulation for duty cycle and life testing. DESCRIPTION Magtrol’s new M-TEST 7 is a state-of-the-art motor testing program for PC (Windows® 7 SP1 ) based data acquisition. Used with a Magtrol Programmable Dynamometer Controller, M‑TEST 7 works with any Magtrol Dynamometer or In-Line Torque Transducer to help determine the performance characteristics of a motor under test. Up to 63 parameters are calculated and displayed utilizing M‑TEST 7’s feature-rich testing and graphing capabilities. An integral component of any Magtrol Motor Test System, M-TEST 7 performs ramp, curve, manual, pass/fail, coast and overload to trip tests in a manner best suited to the overall efficiency of the test rig. Written in LabVIEW™, M-TEST 7 has the flexibility to test a variety of motors in a multitude of configurations. The data generated from this user-friendly program can be stored, displayed and printed in tabular or graphical formats, and is easily imported into a spreadsheet. APPLICATIONS M-TEST 7—besides being well-suited for simulating loads, cycling the unit under test and motor ramping—is also ideal for production line and inspection applications, due to its pass/fail test function. Another time-saving feature, that engineering labs will benefit from, is the ability to duplicate tests and run them automatically. This versatile program is extremely valuable to anyone involved in motor testing. © 2019 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications

Open the catalog to page 1
M-TEST 7 | Motor Testing Software - 2

M-TEST 7 STANDARD FEATURES ▪▪ Multiple Testing Options: Ramp: Select from average ramp down/up or ramp down with inertia correction factor. Also allows extrapolation of free-run and locked-rotor data, plus interpolation of specific speed or torque data points. Curve: Test speed, torque, amps, watts input, watts output and open loop parameters. Capable of adjusting sampling rate and using step or ramp from one load point to the next. Manual: Controls test from front panel of the Dynamometer Controller or screen control while computer acquires data. Allows adjustment of sampling rate....

Open the catalog to page 2
M-TEST 7 | Motor Testing Software - 3

M-TEST 7 SYSTEM CONFIGURATION A Magtrol Dynamometer provides motor loading with a Magtrol Programmable Dynamometer Controller acting as the interface between the PC running M-TEST 7 and the dynamometer. If motor electrical parameters are to be measured or used to determine load points, a Magtrol Power Analyzer is also required. Interfacing between the computer and electronic instrumentation is via the National Instruments™ PCI-GPIB card, RS-232 serial interface or GPIB-USB-HS (when using a DSP7000, DSP6000 or DSP6001) or USB (DSP7000, Micro Dyne). Shaded area represents additional...

Open the catalog to page 3
M-TEST 7 | Motor Testing Software - 4

M-TEST 7 SYSTEM OPTIONS AND ACCESSORIES SYSTEM OPTIONS CATEGORY National Instruments™ 9211 4-Channel TC System National Instruments™ 9213 16-Channel TC System TEMPERATURE 4-Channel TC Modules TESTING HARDWARE 16-Channel TC Modules High Speed Programmable Dynamometer Controller Hysteresis Dynamometers TESTING INSTRUMENTS Eddy-Current Dynamometers Powder Brake Dynamometers In-Line Torque Transducers TM/TMHS/TMB series Power Analyzer Closed-Loop Speed Control and Power Supply Power Supply for WB & PB Dynamometers series 2.7 and 43 Power Supply for WB & PB Dynamometer series 65, 115 and 15...

Open the catalog to page 4

All MAGTROL catalogs and technical brochures

  1. 4 QUADRANT

    2 Pages

  2. ZM Series

    5 Pages

  3. SK-01 Series

    3 Pages

  4. AMF Series

    3 Pages

  5. WB23 & WB27

    7 Pages

  6. Model 5200

    1 Pages

  7. 5211

    1 Pages

  8. 5251-2

    1 Pages

  9. SBB 14

    3 Pages

  10. FMF SERIES

    5 Pages

  11. ZS Series

    7 Pages

  12. RSB

    1 Pages

  13. PC-150

    2 Pages

  14. PCB

    1 Pages

  15. CST 113

    4 Pages

Archived catalogs

  1. WB/PB 65

    8 Pages

  2. WB/PB 15

    8 Pages