*mydirectindustry

Catalogs
MAGTROL
KG-06 | Extensometer

KG-06 | Extensometer

1 / 2 PagesView full catalog

KG-06 | Extensometer

Product catalog summary

Features:

Strain transducer with 1000 Ω impedance.
Temperature-compensated and IP 65 protection class.
Compact and robust design with a height of 6.5mm.
Easy mounting on machined flat surfaces and maintenance-free.

Description:

The Magtrol KG-06 Extensometer is used for measuring deformations in construction or machined parts under load. It functions as a load cell or force transducer, with an output signal proportional to the applied load.

Application:

Ideal for strain measurement in situations where large transducers are unsuitable, particularly on steel structures due to its small size and flat mounting.

Specifications:

Measurement: Nominal traction and compression deformation range of 0 - 250 μm/m.
Electrical Characteristics: Nominal sensitivity of +0.5 mV/V, output impedance of 1000 Ω (± 10 Ω).
Mechanical Characteristics: Maximal usable load is 150% of the final value, made of steel.
Environment: Temperature compensation for steel with α = 12 · 10^-6, operating temperature from -10 °C to +65 °C, IP 65 protection class.
Electrical Connection: Shielded PVC cable, 3m length, with specific wiring diagram.

Options & Accessories:

LMU Series - Load Monitoring Units: Designed for strain gauge transducer applications, providing excitation current and amplifying output signals.
AN Series - Signal Conditioners: Processes and displays signals from various transducers using standard strain-gauge bridges.

Ordering Information:

Ordering Number: P/N 957 - 51 - 22 - 8501

Catalog excerpts

EXTENSOMETER FEATURES ▪ Strain transducer, impedance 1000 Ω ▪ Temperature-compensated ▪ IP 65 protection class ▪ Compact dimensions (6.5mm height) ▪ Robust design ▪ Very flat construction ▪ Easy mounting on machined flat surface DIMENSIONS & MOUNTING The Magtrol KG-06 Extensometer is designed for measuring deformations of construction or machined parts under load. Because its output signal is proportional to the applied load, it can be used as either a load cell or a force transducer. The KG-06 Extensometer is ideal for strain measuring where large transducers are not suitable. Its small dimensions and flat mounting allow for easy control of deformations on steel structures. Fig. 2: KG-06 dimensions and indication about the tightening torque to be applied to the screws SYSTEM CONFIGURATION OPTIONS KG-06 Extensometer LMU Series Load monitor unit AN Series / GAD Series Load monitor display PROG DATA ENTER Fig. 3: KG-06 system configuration and its optional accessories © 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.

Open the catalog to page 1

KG-06 SPECIFICATIONS MEASUREMENT Nominal Traction & Compression Deformation (Ɛ) ELECTRICAL CHARACTERISTICS Nominal Sensitivity Output Impedance MECHANICAL CHARACTERISTICS Maximal Usable Load ENVIRONMENT For steel with α = 12 · 10-6 as standard Temperature Compensation Operating temperature Protection class ELECTRICAL CONNECTION Shielded PVC cable; length 3m b) Connection cable a) Units calibrated with tolerance of ± 2 % upon request Shield isn’t connected to the housing Wiring diagram b) Other cable lenghts available upon request OPTION & ACCESSORIES LMU SERIES - LOAD MONITORING UNITS AN SERIES...

Open the catalog to page 2

KG-06 | Extensometer

KG-06 | Extensometer

Catalog excerpts

All MAGTROL catalogs and technical brochures

Archived catalogs