Catalogs >
MAGTROL >
GAD Series | Large Digital Display

GAD Series | Large Digital Display
3Pages

Catalog excerpts

LARGE DIGITAL DISPLAYS FEATURES ▪ Suspension-Mounted large LED Display ▪ Digit Heights: 57, 102, 150, 200, 300 & 400 mm ▪ Protection Class IP 65 (sealed) ▪ Fully Corrosion Resistant ▪ Adjustable Brightness ▪ Power Supply: 100 ... 240 V AC (optional 11 ... 30 V DC or 48 V AC) ▪ Input: 0 ... 10 V, 0 ... 5 V or 0 ... 20 mA, 4... 20 mA ▪ Fully scalable in kg, t (ton), kN, and other engineering Units ▪ Auto-TARE function ▪ Optional Voltage (0 - 10 V) or Current (4 - 20 mA) Analog Output Fig. 1: GAD 6, digits height 102mm - Large Digital Display LOAD-FORCE-WEIGHT SYSTEMS These high quality, large character digital displays can be used for crane weight display, process weight display, and all other remote weighing applications. They use microprocessor based technology for high reliability and have a non-volatile memory to store all the calibration data. Magtrol Large Digital Displays are used with Load Monitoring Units (LMU Series) or signal conditioners (AN Series), as part of a complete measurement system. Magtrol load measuring pins, which measure load and force to provide overload protection, are available for a wide range of Load-Force-Weight, and in various executions and accuracy classes. Combined, these products constitute an ideal safe measurement system for continuous overload monitoring. SYSTEM CONFIGURATION LB Series Load Measuring Pin MB-02 Series Miniature Load Pin SK-02 Series Cable Force Transducer LMU Series Load Monitor Unit GAD Series Large Digital Display MD-01 Series Force Sensor All Strain Gauges Sensors © 2022 MAGTROL | Due to continual product development, Magtrol reserves the right t

Open the catalog to page 1

GAD SERIES SPECIFICATIONS SIGNAL PROCESSING Voltage input range Voltage input impedance Current input range Current input impedance MEASUREMENT DISPLAY Type Display definition Digits / Color Scaling 4 or 6 digits / red Digital zero and full scale adjustable by programming keys Decimal point Position adjustable by programming keys Filtering / Signal smoothing Time constant adjustable between 0 and 25 seconds Count-by function Round-off of the last digits with steps of 1, 2, 5, or 10 ACCURACY Maximum error ± 25 ppm / °C (full scale) and ± 30 ppm / °C (offset) Reading rate Response time AC...

Open the catalog to page 2

GAD SERIES DIMENSIONS L (with units extension) Units extension DIGITS HEIGHT VIEWING DISTANCE LENGTH without units with units a) The display height does not include the stuffing gland, which are approximately 25mm (1 inch) height With units Without units b) This data is currently not available; please contact our sales department ORDERING INFORMATION ORDERING NUMBER 4 or 6 : Number of digits 057, 102, ... ,400: Digits height 0 : None 1 : kg (kilogram) 2 : t (tons) 3 : kN (kiloNewton) 4 : Other (to be specified) 0 : None 1 : Current output 2 : Voltage output 0 : None C : With calibration...

Open the catalog to page 3