Catalogs >
MAGTROL >
FMF SERIES

FMF SERIES
5Pages

Catalog excerpts

FIXED MOTOR FIXTURES FEATURES ▪▪ For use with Magtrol HD-100, HD-106, HD-400, HD-500, HD-700 and HD-800 Series Dynamometers with long T-slotted base plates ▪▪ Accommodate face mount motors of various sizes (depending on model) ▪▪ Provides rigid mounting for face mount motors under test ▪▪ Base plate contains a rectangular key for proper alignment ▪▪ Secure anchoring system ▪▪ Direct mounting to Magtrol TAB Series Dynamometer Table or dynamometer base plate (depending on model) Fig.1 : FMF-800 Fixed Motor Fixture ▪▪ Adaptor rings allow different styles of motors to be tested on the same fixture (adaptors manufactured per customer requirements) DESCRIPTION Originally designed to test window lift gear motors, Magtrol’s FMF Series Fixed Motor Fixtures are used to secure motors in place while running any test. These versatile fixtures align the motor under test with Magtrol’s HD-100, HD-106, HD-400, HD-500, HD-700 and HD-800 Series Dynamometers for easy setup and coupling—couplings can be provided upon request. Various adaptor rings can be customized to allow several different motors to be tested on the same fixture. FMF Fixed Motor Fixtures can be mounted to any Magtrol Dynamometer T-slotted long base plate or any Hysteresis Dynamometer Table with grooved table top (TAB 1457S, TAB 0800L and TAB 0825L). These fixtures are equipped with a precisely located rectangular key on the bottom of the plate for easy centering. Also included are four adjustable clamping levers and T-nuts. MOUNTING EXAMPLE HD-800-XX-0200 Dynamometer FMF-800 Fixed Motor Fixture Adaptor Ring Motor Under Test © 2019 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.

Open the catalog to page 1

4X CLEARANCE HOLES FOR M4 SOCKET HEAD CAP SCREWS FMF-400-PT 150.0 HD-400-XX-0100 SHOWN - ALSO COMPATIBLE WITH HD-106-XX-0100 AND HD-100-XX-0100 SOLID MODEL AVAILABLE 62.3 PT SERIES - T-SLOTTED BASE PLATE 4X CLEARANCE HOLES FOR M4 SOCKET HEAD CAP SCREWS 3 DIMENSIONAL VIEW SCALE 1:4 INSTALLATION DRAWING THIRD ANGLE PROJECTION THIS DRAWING AND SPECIFICATION CONTAINS PROPRIETARY INFORMATION TO MAGTROL INC. ANY DISCLOSURE OR REPRODUCTION OF THIS DOCUMENT WITHOUT WRITTEN AUTHORIZATION FROM MAGTROL INC. IS EXPRESSLY PROHIBITED UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS DIAMETERS...

Open the catalog to page 2

MOTOR ADAPTER (NOT INCLUDED) MOTOR UNDER TEST 6 REVERSIBLE UPRIGHT MOTOR FASTENERS (NOT INCLUDED) DEFAULT CONFIGURATION 85 H8 65 INSTALLATION DRAWING DESIGN THIRD ANGLE PROJECTION THIS DRAWING AND SPECIFICATION CONTAINS PROPRIETARY INFORMATION TO MAGTROL INC. ANY DISCLOSURE OR REPRODUCTION OF THIS DOCUMENT WITHOUT WRITTEN AUTHORIZATION FROM MAGTROL INC. IS EXPRESSLY PROHIBITED UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS DIAMETERS CONCENTRIC: .08 TIR FACES PERPENDICULAR: .08 INTERPRETATION PER ASME Y14.5M-1994 REMOVE ALL BURRS AND BREAK SHARP EDGES 0.13/0.25 X 45° INSIDE...

Open the catalog to page 3

SOLID MODEL AVAILABLE 6.6 .260 CLEARANCE HOLES FOR M6 SOCKET HEAD CAP SCREWS 5 5/8" MAXIMUM MOTOR OUTSIDE DIAMETER ADAPTOR RINGMANUFACTURED AS REQUIRED MOTOR UNDER TEST 3 DIMENSIONAL VIEW SCALE 1 : 8 NOTE: DIMENSIONS IN [ ] ARE MILLIMETERS DESIGN SOLID MODEL AVAILABLE FIXED MOTOR FIXTURE, 700 THIRD ANGLE PROJECTION THIS DRAWING AND SPECIFICATION CONTAINS PROPRIETARY INFORMATION TO MAGTROL INC. ANY DISCLOSURE OR REPRODUCTION OF THIS DOCUMENT WITHOUT WRITTEN AUTHORIZATION FROM MAGTROL INC. IS EXPRESSLY PROHIBITED UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES, DIAMETERS CONCENTRIC: .003...

Open the catalog to page 4

H MAGTROL ADAPTOR RING When ordering an FMF Fixed Motor Fixture, it is necessary to define the motor mounting specifications so that Magtrol can manufacture an appropriate adaptor ring for your motor. PT : For HD-100/106/400/500/700 Series dynamometers mounted to PT material only TAB : For HD-500/700 Series dynamometers mounted to TAB 1457S Dynamometer Table only (Blank) : For HD-800 Series Dynamometers ordered with long t-slot base plate, or mounted to TAB 0800L or TAB 0825L Dynamometer Table © 2019 MAGTROL | Due to continual product development, Magtrol reserves the right to modify...

Open the catalog to page 5