Catalogs >
MAGTROL >
BPM Series | Brake Power Module

BPM Series | Brake Power Module
4Pages

Catalog excerpts

BRAKE POWER MODULE FEATURES ▪ For use with Magtrol Hysteresis Brakes and Clutches ▪ Power supply: 20 to 35 VDC ▪ Current control: up to 1 (model BPM 101) A up to 3 (model BPM 103) A ▪ Pulse Width Modulation (PWM) switching frequency: 5 kHz ▪ Compact design (width 22.5 mm) ▪ Polyamide housing with snap-on DIN-Rail (EN 50022) mounting ▪ Cost effective solution Fig. 1: BPM 103 | Brake Power Module DESCRIPTION The BPM Series Brake Power Module is widely used to supply and control the current (up to 3 A) of Magtrol Hysteresis Brakes and Clutches. This compact component is easy to mount (DIN-Rail snap-on) and recommended for easily controlling a wide range of brakes and clutches. The analog input of the Brake Power Module is designed for 0 -10 VDC signals. At the maximum set value of 10 VDC, the output current is adjustable from 0 to 100 With the use %. of adjustable potentiometers, the zero point can be shifted from 0 to 20 %. SYSTEM CONFIGURATION DSP 7000 POWER Other Source USER DISPLAY DYNAMOMETER CONTROLLER BRAKE STATUS DISPLAY BOTH SETUP POWER UNITS OPEN LOOP BRAKE ON/OFF TORQUE UNITS RESET TARE External Power Supply BPM Series Brake Power Module © 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.

Open the catalog to page 1

BPM SERIES SPECIFICATIONS ELECTRICAL CHARACTERISTICS Supply Voltage (UV) Power Consumption 70 mA + load current BPM 101: up to 1 / UV minus 2 V A BPM 103: up to 3 / UV minus 2 V A Power Output Imax / Vmax Current Regulation Inductive loads only Current Adjustment Zero Displacement Pulse Width Modulation (PWM) Switching Frequency Wiring Diagram Optional cable (see accesories) Reference Value Input ENVIRONMENT Service Temperature Range MECHANICAL CHARACTERISTICS Housing Material Gray polyamide insulation material Device Mounting NOTE: When used with Magtrol Hysteresis Brakes, the maximum...

Open the catalog to page 2

BPM SERIES ELECTRICAL DIAGRAM Zero + Current Controller current Gain - Proportional Control Valves - Hysteresis Clutches - Clutches - Brakes - Moving Coils NOTE: This Brake Power Module includes other functionalities. However, only the functions presented above are fully supported by Magtrol. Magtrol advises against any other non described uses. Magtrol will not offer any technical support on these functions and can not be held responsible for any inappropriate uses. ACCESSORIES To allow the connection between the DPS 7000 High speed Programmable Dynamometer Controller and the BPM Series...

Open the catalog to page 3

BPM SERIES SYSTEM OPTIONS AND ACCESSORIES TORQUE TRANSDUCERS Magtrol’s In-Line Torque Transducers provide extremely accurate torque and speed measurement over a very broad range. These products are very reliable, providing high overload protection, excellent long term stability and high noise immunity. To provide customers with several price/performance options, Magtrol offers whole range of torque transducer models: latest generation (TS Series), basic (TMB Series), high accuracy (TM Series) and high speed with high accuracy (TMHS Series). DSP 7000 | HIGH-SPEED PROGRAMMABLE DYNAMOMETER...

Open the catalog to page 4