ADJUSTABLE MOTOR FIXTURES FEATURES ▪ Accommodate motors up to 8¼ inches in diameter ▪ Used with most Magtrol HD Series Dynamometers ▪ Secure anchoring system ▪ Easy motor centering ▪ Extremely versatile and adaptable ▪ Vibration protection ▪ Scratch-free clamping ▪ Tool-free adjustment ▪ Direct mounting to Magtrol TAB Series Dynamometer Table or dynamometer base plate (depending on model and system configuration) Fig. 1: AMF-1 Adjustable Motor Fixture DESCRIPTION Magtrol’s AMF Series Adjustable Motor Fixtures are used to secure small to medium-sized motors in place while running any test. These extremely versatile fixtures also enable easy motor centering for coupling to a Magtrol HD Series Hysteresis Dynamometer. (Couplings can be supplied upon request.) Various motor lengths are accommodated by either an attached T-slot base plate or sliding base, depending on the model. The AMF-1, -2 and -3 Fixtures feature one or two adjustable bridges, each fitted with a fluted knob clamp screw, to allow clamping anywhere along the axis of the motor. The adjustable bridge on the AMF-V Fixture incorporates a straight-line action clamp with a V-angle rubber padded clamp to maximize the mounting area. Fig. 2: AMF-V Adjustable Motor Fixture To safeguard the motor, locking thumb screws provide protection against vibration and all motor-to-fixture contact surfaces are nylon padded for scratch-free clamping. Fig. 3: AMF-3 Adjustable Motor Fixture © 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.

AMF-2 Magtrol HD-100-XXX-0100 Dynamometer and AMF-1 Adjustable Motor Fixture with 2-inch motor locked in place Magtrol HD-705-XXX-0100 Dynamometer and AMF-2 Adjustable Motor Fixture with 4-inch motor locked in place Bridge Thumb Screw Motor Fluted-knob Clamp Screw T-slot Base Dynamometer Base Plate Nylon Pads © 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning. DATASHEET www.magtrol.com

NOTE: The AMF-3 and AMF-V can also be mounted directly to the HD-825 table (TAB 0825L). Position Slider Dual Lead Screw Adjustment Thumb Screws © 2020 MAGTROL | Due to continual product development, Magtrol reserves the right to modify specifications without forewarning. DATASHEET www.magtrol.com MAGTROL INC 70 Gardenville Parkway Buffalo NY 14224 | USA MAGTROL SA Route de Montena 77 1728 Rossens | Switzerland Worldwide Distribution Network