ADVANCED EQUIPMENT DESIGN I IMPREGNATORS & RECIPROCATORS CUSTOMER FOCUSED. PRODUCT DRIVEN. LIGHT BLUE LINE: ADVANCED EQUIPMENT DESIGN | IMPREGNATORS & RECIPROCATORS Impregnator The MVP Impregnator Systems are a series of high output, roll goods layup systems designed for wetting and placing woven roving and other roll good materials. These units are designed for materials that can maintain their integrity when wetted. The Impregnator can be provided as a stand alone portable unit, or mounted on overhead bridge cranes. Standard Features Equipment Configuration: Stationary or portable Mix & Dispense Equipment: Epoxy, Polyester, Vinylester, etc. Controls: Pneumatic controlled & adjusted Auto Level Controls: Controls resin dispensed level in Nip Rolls Instrumental Dials: Adjustment for fabric changes & variable wet-out Glass to Resin Ratio: Content up to 55% Standard Widths Available: 18in (457mm) to 100in (2.54M) Output Capacities: 1,000 lbs (454 kg) per hour Processing Speeds: 20 ft. (6.1 M) per minute Cleaning: Solvent flush spray system feed rolls Standard Options Take-Up Assembly: Spools up wetted materials with protective film Bridge Crane Mounted: Provides wetted material directly from above into mold resin bath Bridge Crane Model metering rolls Portable Unit Mobile Gantry Material Path Reciprocator Flat Panel System The Reciprocator from MVP is designed to automatically produce flat panels or sheets using a chopper gun and/or gelcoat spray gun that traverses a mold or table. Spray-up and rollout are both completely automated, and some contoured shapes may be produced when part of the rolling is performed by hand. Standard Features Equipment Configuration: Stationary or portable Mix & Dispense Equipment: Epoxy, Polyester, Vinylester, etc. Controls: PLC controlled & adjusted Standard Available Sizes: 8ft (2.7M) to 12ft (3.6M) wide Gelcoat Output Capacities: 5,400 ft.2/hr (500 M2/hour) Lamination Output Capacities: 2,700 ft.2/hour (240 M2/hour) Spray Gun Travel Speed: 5 ft./second (1.5 M/second) Fiber Chopper: Four (4) strand chopper gun Automatic Flush System Standard Options • • • • • Mold Drives Panel Widths up to 16 ft. (4.8 M) Combo Gelcoat and Chopper Units Environmental Enclosures Traveling Units over Stationary Molds Traveling Reciprocator www.mvpind.com | 865.686.5670 | email: [email protected] www.mvpind.com | 865.321.8809 | email: [email protected] 2030 Falling Waters Rd., Suite 350, Knoxville, TN 37922 CUSTOMER FOCUSED. PRODUCT