INDEPENDENT PUMP DRIVE (IPD) SYSTEM Dispense materials in precise shot sizes and integrate easily with automated and robotic applications. The Independent Pump Drive System consists of a PLC controller, main hydraulic unit, and MVP’s precision fluid sections. When paired together, the system will precisely mix/meter up to six components in a range of rates. SYSTEM FEATURES • • • • • • • • Up to 6 fluid sections can be configured per unit Output ranges from 50-22,500cc (.015-6.0 gpm) per fluid section Fluid pressures from 100-2700 psi 10-100:1 ratio range 1% accuracy** +/-5cc/min delivery accuracy** Guided, direct driven fluid sections for low maintenance/ high reliability High accuracy encoders for precision control of ratios/ outputs All parameters dependent on material characteristics and fluid section configuration HIGHLY CUSTOMIZABLE Independently driven fluid sections allow for custom ratios, adjustments on the fly, recipe-based programs, or external source controls such as robotics and other automated equipment OPERATION IS SIMPLE Simply enter your desired ratios of each material and set a rate. The system will then start the operation and precisely meter each component UNMATCHED PRECISION The System will take multiple ratios and meter them very precisely at +/- 1%

Flow meters Pressure transducers Thermocouples Heated hoses Transfer/feed pumps for high viscosity materials Solvent/Air purge system Custom mix/dispense head External communication with external devices Ex: Data exchange with robotic arm for start/stop, alarms and on the fly ratio adjustment MAIN HYDRAULIC POWER SOURCE Nullifies need for large volume of air to operate. Great for mobile operations or where compressed air is at a premium. Hydraulic oil cooler ensures unit can run for extended periods of time and/or higher pressures without overheating. Precision analog controllers ensuring precise...