Group: AMETEK
Catalog excerpts
Solitel® Vibrating Rod Level Switch D E S C R I P T I O N Solitel® Vibrating Rod Level Switches provide reliable level detection of powders and bulk solids. This compact, integral switch is suitable for high or low level detection in hoppers or silos. It may also be used for plugged chute detection. The single-piece probe and the unique self-clean cycle avoid problems of buildup. Sensitivity of the instrument can be adjusted to detect a variety of solid materials ranging from heavy granular materials to light powders with bulk densities less than one pound per cubic foot. T E C H N O L O G Y The Solitel rod vibrates at a frequency of 350 Hz. When in contact with the media, the vibration is dampened. The attenuation of the vibration is detected by the integral mount electronics which change the state of the relay. The unique self-clean feature is activated when the vibration is dampened. The self-clean circuitry increases the amplitude of the vibration to dislodge any buildup which may have occurred. • Single rod design eliminates clogging Powders and bulk solids with maximum particle size of 1⁄2 inch (10 mm) including: • High temperature version up to +320° F (+160° C) • Self-clean cycle and polished probe minimize solids buildup • Plastic powders and pellets • Class I, Div. 2 and Class II, Div. 1 approval • Pulverized coal • Adjustable sensitivity allows easy calibration for various bulk densities • Extended rigid probes up to 100 inches (2540 mm) • Extended flexible lengths to 65 feet (20 meters) • Aerosil® (fume silica) • Wood chips and sawdust • Cement, lime
Open the catalog to page 1110 VAC +10/-15% 220 VAC +10/-15% 24 VDC (±10%) Less than or equal to 3 VA 350 Hz SPDT 8 amp @ 250 VAC (resistive) SPDT 1 amp @ 24 VDC (resistive) 4 to 10 seconds (depending on sensitivity adjustment) 11⁄2" NPT NEMA 4X, 9 -4° to +230° F (-20° to +110° C) -40° to +320° F (-40° to +160° C) -40° to +140° F (-40° to +60° C), refer to chart below 98% 360 PSIG 316 stainless steel Polyethylene coated steel 8.25 inches (209 mm) 10 to 100 inches (25 to 254 cm) 3 to 65 feet (1 to 20 meters) Power consumption Operation frequency Output relay Time delay Process connection Housing Operating process...
Open the catalog to page 2Models available for quick shipment, usually within one week after factory receipt of a complete purchase order, through the Expedite Ship Plan (ESP) Standard, -4° to +230° F (-20° to +110° C), insertion length in inches Enhanced performance, -40° to +320° F (-40° to +160° C), insertion length in inches Standard, -4° to +230° F (-20° to +110° C), insertion length in centimeters Enhanced performance, -40° to +320° F (-40° to +160° C), insertion length in centimeters PROBE TYPE H R Standard rigid probe, 8.25" insertion length Extended rigid probe, see “Insertion length” below INPUT VOLTAGE 0...
Open the catalog to page 3Conduit connection Conduit connection Conduit connection Insertion length Standard Rigid Probe Extended Rigid Probe Extended Flexible Probe MODEL APPROVED APPROVAL CLASSES Class I, Div. 2; Groups A, B, C, & D Class II, Div. 1; Groups E, F, & G, TYPE 4X These units have been tested to EN 50081-2 and EN 50082-2 and are in compliance with the EMC Directive 89/336/EEC. These units have been evaluated to the applicable UL and CSA standards. CSA is accredited as a NRTL (National Recognized Testing Laboratory) in the United States. Q U A L I T Y The quality assurance system in place at Magnetrol...
Open the catalog to page 4All Magnetrol - AMETEK catalogs and technical brochures
-
Crude Oil Processing
8 Pages
-
Natural Gas Processing
12 Pages
-
Interface In The Field
14 Pages
-
Emulsion In The Field
9 Pages
-
PRODUCT LINE CATALOGUE
106 Pages
-
Aurora® Magnetic Level Indicator
28 Pages
-
Atlas™ Magnetic Level Indicator
24 Pages
-
STEAM DRUM LEVEL MATTERS
1 Pages
-
INTERFACE IN THE FIELD
1 Pages
-
Echotel® 355
4 Pages
-
Echotel® 335
4 Pages
-
Power Generation
16 Pages
-
Petroleum Refining
16 Pages
-
Seal Pots
4 Pages
-
Mass Flow Measurement
12 Pages
-
Interface Level Measurement
8 Pages
-
Heat Rate Awareness
8 Pages
-
Ethylene Applications
8 Pages
-
Thermatel® TD1/TD2
16 Pages
-
Kotron® 082
4 Pages
-
Enhanced Jupiter®
16 Pages
-
GEMINI™
32 Pages
-
Aurora®
32 Pages
-
Atlas™
24 Pages
-
Horizon TM Model 704
8 Pages
-
Eclipse® Enhanced 705 Hygienic
12 Pages
-
Eclipse® Enhanced 705
8 Pages
-
Pneumatic Tuffy®
12 Pages
-
Models T5x & T6x
8 Pages
-
Models T20/T21
12 Pages
-
Series B73 and Series 75
12 Pages
-
Series 3
24 Pages
-
Model J52
2 Pages
-
Model B40
4 Pages
-
TUFFY® II
12 Pages
-
Digital E3 Modulevel®
12 Pages
-
Floating Roof Detection
16 Pages
-
APM Pneumatic Modulevel®
12 Pages
-
Flue Gas Desulferization
8 Pages
-
Energy Management
4 Pages
-
API 2350 Overfill Prevention
8 Pages
-
PULSAR ® R96
1 Pages
-
Water & Wastewater
12 Pages
-
Displacer Switches
20 Pages
-
Displacer Transmitters
4 Pages
-
Guided Wave Radar
12 Pages
-
Magnetic Level Indicators
12 Pages
-
Magnetostrictive
16 Pages
-
Thermal Dispersion
12 Pages
-
Ultrasonic Contact
4 Pages
-
R Series High Temp Switch
12 Pages
-
Series K Pneumatic Switch
8 Pages
-
J Series Pneumatic Switch
8 Pages
-
Liquid Displacer Level Switches
16 Pages
-
Crude Oil Processing
8 Pages
-
Product Line Quick Reference
8 Pages