1. Catalogs
  2. Magnetrol - AMETEK
  3. OPTIMIZE QUENCH SETTLER OPERATION

OPTIMIZE QUENCH SETTLER OPERATION

OPTIMIZE QUENCH SETTLER OPERATION

Product catalog summary
Customer Profile
Industry: Petrochemical
Location: Ethylene plant
Application: Quench settler
Introduction
The document discusses optimizing quench settler operations in an ethylene plant using Magnetrol level devices to improve production and product quality.
Challenges
  • Loss of interface control between caustic water and hydrocarbons reduces quench tower efficiency, leading to decreased productivity and potential secondary reactions.
  • Long residence time in the settler creates a thicker emulsion layer, impacting production.
  • Water recirculation may carry hydrocarbons back into the quench tower, reducing productivity and potentially fouling equipment.
  • Increased feedstock requires more cooling fluids, emphasizing the importance of efficient water recirculation and quench tower operation.
Solution
  • Magnetrol level devices provide reliable control of the quench settler interface, enhancing ethylene production and product quality.
  • Fast residence time in the settler is crucial for maintaining product quality and preventing secondary reactions.
  • Guided wave radar (GWR) measures tighter emulsion layers, while magnetostrictive devices measure thicker layers with a float designed for the emulsion bottom.
  • Total level and interface measurements are possible.
Results
  • Reliable interface measurement leads to efficient quench tower operation.
  • Optimized production and product quality through improved quench tower operation.
  • Potential savings in caustic usage and protection against equipment fouling and downtime due to hydrocarbon carryover.
  • A level solution tailored to the specific needs of the quench settler operation.
See more

Catalog excerpts

OPTIMIZE QUENCH SETTLER OPERATION-1

CUSTOMER PROFILE INDUSTRY: Petrochemical LOCATION: Ethylene plant APPLICATION: Quench settler ICEBREAKER “If Magnetrol can reliably provide total level and interface in your quench settler, would this optimize production and increase product quality?" CHALLENGES Loss of interface control of caustic water and hydrocarbon in the quench settler means: • Reduced efficiency of the quench tower, leading to reduced productivity for the plant if the fluid composition negatively changes in the tower and secondary reactions occur (less ethylene produced from the feedstock) • A long residence time in the settler, which creates a thicker emulsion layer due to the caustic and impacts production • Water recirculation back into the quench tower may carry over hydrocarbons, reducing productivity and potentially fouling equipment • As feedstock is increased, more cooling fluids are required, which increases the importance of water recirculation and general quench tower operation SOLUTION Magnetrol® level devices allow for reliable control of the quench settler interface to increase ethylene production and product quality • Fast residence time in the settler is important to production in maintaining desirable product quality and preventing secondary reactions in the tower • Fast residence time will also assist level measurement to keep a tighter emulsion layer in the settler (less reaction with the caustic) • Guided wave radar (GWR) can be utilized to measure tighter emulsion layers while magnetostrictive will measure thicker emulsion layers with a float designed to follow the bottom of the emulsion • Total level and interface can both be measured RESULTS Reliable interface measurement leads to efficient quench tower operation • Optimized production and product quality through the quench tower • Potential savings in caustic usage with more efficient quench tower operation • Protection against fouling of equipment and downtime due to hydrocarbon carryover • A level solution that fits the needs of the specific quench settler operation LEVEL MATTE

 Open the catalog to page 1

All Magnetrol - AMETEK catalogs and technical brochures

  1. TUFFY® II

    12  Pages

  2. E4 Modulevel®

    12  Pages

  3. Echotel® 355

    4  Pages

  4. Seal Pots

    4  Pages

  5. GEMINI™

    32  Pages

  6. Models T20/T21

    12  Pages

  7. Series 3

    24  Pages

  8. Model J52

    2  Pages

  9. Model B40

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.