1. Catalogs
  2. Magnetrol - AMETEK
  3. MODULAR INSTRUMENTATION BRIDLE

MODULAR INSTRUMENTATION BRIDLE

MODULAR INSTRUMENTATION BRIDLE

MODULAR INSTRUMENTATION BRIDLE

Product catalog summary
Introduction to Modular Instrumentation Bridle (MIB)
Orion Instruments introduces the Modular Instrumentation Bridle (MIB) as a cost-effective solution for level control in the process industry. The MIB offers a comprehensive approach to integrating instrumentation and control technologies with vessels, aiming to reduce costs and enhance performance across various aspects such as vessel design, construction, installation, and maintenance.

Benefits of the Bridle
  • Savings: Reduces direct process connections and valves, lowering engineering and construction costs.
  • Safety: Transfers potential leak points to the MIB, which can be independently removed, repaired, and tested.
  • Simplicity: Simplifies design and implementation of level and control solutions with minimal process connections.
  • Isolation: Provides stable level measurement by isolating it from vessel dynamics and obstructions.

Custom Engineering and Capabilities
The MIB is designed, engineered, and fabricated in-house, ensuring high standards and reducing sourcing and installation complexities. It is manufactured in an ASME certified facility, ensuring durability and compliance with industry standards.

Level Control and Isolation
The MIB allows for precise liquid level control through various technologies and provides options for manual, automatic, or modulated isolation of chambers for maintenance and control functions.

Vessel Connections
Custom-manufactured to user specifications, the MIB offers multiple connection options to optimize placement and minimize site rework.

Process and Fluid Control
The MIB can integrate various controls and measurement options, enhancing maintenance, safety, and operation ease. It allows for the isolation and drainage of chambers, minimizing downtime and waste.

Modular Concept
The MIB facilitates the integration of instrumentation and control components into a centralized form with minimal vessel connections, overcoming single point of failure risks through proper sizing and material selection.

Engineering and Manufacturing Standards
Orion's MIBs are constructed to meet high industry standards, including ASME and NACE certifications. Materials are traceable and documented, with non-destructive testing ensuring quality.

Custom Designed Bridle Solutions
The MIB offers endless configurations for process connections and instrumentation placement, allowing for tailored solutions to meet specific process needs.
See more

Catalog excerpts

MODULAR INSTRUMENTATION BRIDLE-1

MODULAR INSTRUMENTATION BRIDLE

 Open the catalog to page 1
MODULAR INSTRUMENTATION BRIDLE-2

A ROBUST BRIDLE SOLUTION At a time when cost-effective level control solutions are paramount in the process industry, Orion Instruments introduces the Modular Instrumentation Bridle (MIB). Our unique approach to complementing a vessel with the appropriate instrumentation and control technologies goes beyond simply offering bolt-on level, flow, high/low level cutoff switching, etc. to a multitude of process connections. At Orion Instruments, we consider all level control needs as they affect overall costs of the project as well as performance of the specified measurement technologies. The engineering...

 Open the catalog to page 2
MODULAR INSTRUMENTATION BRIDLE-3

An Orion Design From Start to Finish Designed, engineered, and fabricated in-house, simplifying the cumbersome sourcing, procurement, and installation process. Built to Last Manufactured to the highest industry standards in our ASME Section VIII, Division I certified (U-Stamp) manufacturing facility. Optimized In-House Orion pre-assembles all bridle instrumentation, bringing assurance of form, fit, and function. Cost-Effective Results in the Field MIB solutions reduce costs by eliminating unnecessary postfabrication vessel modifications. Plug-and-Play An Orion MIB significantly reduces the hassle...

 Open the catalog to page 3
MODULAR INSTRUMENTATION BRIDLE-4

M O D U L A R I N S T R U M E N T AT I LEVEL CONTROL Continuous, Point, Visual, Electronic | The addition of level measurement to the bridle assembly (usually in a secondary chamber) allows for precise control of liquid level, leading to optimization of the process. Options exist for a wide range of both electronic continuous level technology (guided wave radar, differential pressure, capacitance, buoyancy, etc.) and local visual indication (magnetic level indication or sight glasses). ISOLATION Manual, Automatic, or Modulated | The ability to isolate primary and secondary chambers allows for...

 Open the catalog to page 4
MODULAR INSTRUMENTATION BRIDLE-5

THE MODULAR CONCEPT Facilitates the integration of instrumentation, sensor options, valves, vents, and drains into a centralized and pre-fabricated form factor with minimal vessel connections. FLUID CONTROL The addition of drain and vent valves onto the bridle assembly enhances the maintenance, safety, and ease of operation. The ability to isolate and then drain a single chamber on the assembly minimizes downtime and product waste while safety and targeted maintenance can be performed. PROCESS CONTROL Many other options exist for populating a modular instrumentation bridle to provide a full spectrum...

 Open the catalog to page 5
MODULAR INSTRUMENTATION BRIDLE-6

E N G I N E E R E D TO T H E H I G H E S T S TA N D A R D S E N G I N E E R I N G & M A N U FAC T U R I N G Orion constructs all bridles within an ASME Sec. VIII, Div. I certified manufacturing facility, ensuring the best possible quality. Bridles are built to meet the industry’s highest standards, including ASME B31.1/B31.3 and NACE MR0175/MR0103. In addition, materials used in the construction of all bridles are fully traceable and documented. Non-destructive tests validate fabrication quality, from weld integrity to chamber metallurgy. • A SME Sec. VIII Div. I BPVC certified manufacturing...

 Open the catalog to page 6
MODULAR INSTRUMENTATION BRIDLE-7

CUSTOM DESIGNED BRIDLE SOLUTIONS E N D L E S S C O N F I G U R AT I O N S Process connections and couplings can be placed virtually anywhere along the bridle chamber, allowing for limitless combinations of switches, sensors, transmitters, and other process instrumentation technologies. Vessel connections can also be placed on the top and bottom of the bridle chamber if needed.

 Open the catalog to page 7
MODULAR INSTRUMENTATION BRIDLE-8

705 Enterprise Street | Aurora, IL 60504 office 630.969.4000 | [email protected] ametek-measurement.com Bulletin: ORI-210.0 Effective: October 2015

 Open the catalog to page 8

Archived catalogs

  1. Model B40

    12  Pages

  2. Model J52

    2  Pages

  3. Series 3

    24  Pages

  4. Models T20/T21

    12  Pages

  5. GEMINI™

    20  Pages

  6. Seal Pots

    4  Pages

  7. Echotel® 355

    8  Pages

  8. E4 Modulevel®

    12  Pages

  9. TUFFY® II

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.