1. Catalogs
  2. Magnetrol - AMETEK
  3. Model ORS Point Level Switch

Model ORS Point Level Switch

Model ORS Point Level Switch

Model ORS Point Level Switch

Product catalog summary
Overview: The ORS reed switch is designed to enhance the control capabilities of Orion's magnetic level indicators (MLIs). It is housed in an explosion-proof stainless steel enclosure and can be mounted externally on the MLI using clamps, allowing for easy addition or repositioning without process disruption.
Specifications:
  • Model: ORS-xxxx-001
  • Type: Bi-stable reed switch
  • Supply Voltage: 250VAC/150VDC max
  • Contact Rating: 1.0 amp AC/DC max
  • Maximum Load: 25 watts AC/DC max
  • Deadband: ±0.50” (13 mm) float travel
  • Temperature Range: -58 to +250 °F (-50 to +121 °C) without insulation; up to 500 °F (260 °C) with insulation
  • Enclosure Rating: NEMA 4X/7/9
  • Enclosure Material: 316 stainless steel, with optional aluminum or stainless steel junction box
  • Mounting: Clamp mount to MLI or switch mount rod
  • Conduit/Cable Entry: 1⁄2" MNPT without junction box, 3⁄4" FNPT with optional junction box
Agency Approvals:
  • FM: Class I, Div. 1, Groups B, C, & D; Class I, Div. 2, Groups A, B, C, & D
  • CSA: Class II, Groups E, F, & G; Class III, Type 4X
  • ATEX: ORS-xAxx-xxx ATEX II 2 G Ex d IIC T6 Ta = -40 to +70 °C
  • IECEx: ORS-xAxx-xxx IECEx d IIC T6 Ta = -40 to +70 °C
Installation and Mounting: The ORS switch is field adjustable. It can be mounted using clamps or a switch mount rod, which allows for positioning along the MLI chamber. The switch should be oriented with the green ground screw closest to the bottom of the MLI. Insulation may be required between the MLI body and the switch.
Wiring: The switch housing has color-coded leads: White = Common, Black = Closed when float is below switch, Red = Closed when float is above switch.
Mounting Options:
  • Clamp mounted on MLI (standard) for temperatures ≤ 121 °C (250 °F)
  • Clamp mounted with insulation pad for temperatures between 121 °C (250 °F) and 260 °C (500 °F)
  • Attached to switch mount rod for temperatures ≤ 260 °C (500 °F)
Additional Information: The document includes a cautionary note that improper use may impair equipment protection. The bulletin is effective as of June 2021 and supersedes the February 2020 version.
See more

Catalog excerpts

Model ORS Point Level Switch-1

Model ORS Point Level Switch The model ORS reed switch is available to augment the control capabilities of Orion’s extensive line of magnetic level indicators. Housed in an explosion proof stainless steel enclosure, the ORS mounts to the outside of the MLI via clamps. This mounting style allows addition or repositioning of switches at any time, without disruption of the process. Each switch is designed for optimal repeatability and reliability. The magnetic field produced by the MLI float actuates the ORS when the liquid level moves the float into the proximity of the reed switch. The switch is bi-stable, so it will not reset until the float’s magnetic field passes it in the opposite direction. Model: ORS (shown with optional junction box) SPECIFICATIONS Model Bi-stable reed switch Supply Voltage Contact Rating Maximum Load Temperature Range No insulation: -58 to +250 °F (-50 to +121 °C) Requiring insulation: up to 500 °F (260 °C) Enclosure Rating Enclosure Material Standard housing: with optional junction box: Clamp mount to MLI or switch mount rod (both are field adjustable) Conduit/Cable Entry ⁄2" MNPT without junction box (see digit 4) ⁄4" FNPT when optional junction box is provided (consult factory for additional options) ORS as a high level switch 316 stainless steel aluminum or stainless steel Class I, Div. 1, Groups B, C, & D Class I, Div. 2, Groups A, B, C, & D Class II, Groups E, F, & G Class III, Type 4X

 Open the catalog to page 1
Model ORS Point Level Switch-2

The ORS level switch is completely field adjustable. Simply loosen the mounting clamps and position at the desired location. Ensure that the switch always remains in close proximity to the internal float. A switch mount rod is an available alternative method for mounting the ORS to an MLI when insulation is present. The rod assembly, which is welded to the MLI chamber, allows the switch to slide along the full length. When the desired position is selected, simply tighten it in place. MOUNTING TO ATLAS™ OR GEMINI™ MLI With mounting clamps loosened, position ORS reed switch on the MLI body so that...

 Open the catalog to page 2

Archived catalogs

  1. Model B40

    12  Pages

  2. Model J52

    2  Pages

  3. Series 3

    24  Pages

  4. Models T20/T21

    12  Pages

  5. GEMINI™

    20  Pages

  6. Seal Pots

    4  Pages

  7. Echotel® 355

    8  Pages

  8. E4 Modulevel®

    12  Pages

  9. TUFFY® II

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.