1. Catalogs
  2. Magnetrol - AMETEK
  3. Model OES Point Level Switch

Model OES Point Level Switch

Model OES Point Level Switch

Model OES Point Level Switch

Product catalog summary
Overview: The document provides technical specifications and installation guidelines for the OES Point Level Switch, used to enhance the control capabilities of Orion's magnetic level indicators (MLI). The switch is designed for high reliability and repeatability, utilizing a magnetically coupled DPDT mechanism.
Specifications:
  • Model: OES-xxxx-xx2
  • Type: Bi-stable, magnetically coupled switch
  • Contact Rating: 10.1A @ 125-250 VAC, 10.1A @ 8-14 VDC, 4A @ 30 VDC, 400mA @ 125 VDC, 200mA @ 250 VDC
  • Temperature Range: -58 to 392 °F (-50 to 200 °C)
  • Enclosure Rating: TYPE 4X/7/9
  • Enclosure Material: Aluminum or stainless steel
  • Mounting: Clamp mount to MLI or switch mount rod (field adjustable)
  • Conduit/Cable Entry: 3⁄4" FNPT
Agency Approvals:
  • FM: Explosion Proof for US/Canada
  • ATEX/IEC: Flameproof
  • CE: Compliant with Low Voltage Directives
Installation Guidelines:
  • Position the switch on the MLI body at the desired switch point level.
  • Ensure the switch is oriented correctly with the arrow pointing toward the top of the MLI.
  • Secure the switch using clamps and replace the housing cover.
  • Special care is required when adding switches to Aurora® MLI to ensure proximity to the internal float magnet.
Mounting Options:
  • Clamp mounted on MLI (standard)
  • Clamp mounted on MLI with insulation pad
  • Attached to switch mount rod
Special Conditions of Use:
  • Flamepaths are not intended to be repaired; consult the manufacturer if necessary.
  • Follow manufacturer’s instructions to reduce electrostatic charging hazards.
Additional Information: The document includes diagrams for wiring and mounting, and emphasizes the importance of correct installation to maintain equipment protection. Performance specifications are subject to change without notice.
See more

Catalog excerpts

Model OES Point Level Switch-1

AMETEK® LEVEL MEASUREMENT SOLUTIONS The Model OES switch is utilized to expand the control capabilities of the Orion brand's extensive line of magnetic level indicators (MLI). This magnetically coupled DPDT mechanism is clamp-mounted to the outside of the MLI. This mounting style allows easy addition or repositioning of switches without disruption of the process. Designed for optimal repeatability and reliability, the OES-2 is actuated by simple magnetic coupling. As the liquid level moves, the MLI float (with its internal magnets and flux rings) follows. When the float moves into the proximity of the switch, the switch magnet interacts with the float's magnetic field actuating the switch. The bi-stable design of the switch ensures that it will not reset until the float passes the switch in the opposite direction. For use in Installation Category II, Pollution Degree 2. If equipment is used in a manner not specified by the manufacturer, protection provided by the equipment may be impaired. AGENCY APPROVALS 1. The flamepaths of the equipment are not intended to be repaired. Consult the manufacturer if repair of the flamepath joints is necessary. 2. Refer to the manufacturer's instructions to reduce the potential of an electrostatic charging hazard on the equipment enclosure.

 Open the catalog to page 1
Model OES Point Level Switch-2

The OES level switch is completely field adjustable. Simply loosen the included mounting clamps and position at the desired location. Ensure that the switch always remains in close proximity to the internal float. A switch mount rod is an available alternative method for mounting the OES to an MLI when insulation is present. The rod assembly, which is welded to the MLI chamber, allows the switch to slide along the full length. When the desired position is selected, simply tighten it in place. Position the OES switch on the MLI body so that the centerline of the switch enclosure is at the desired...

 Open the catalog to page 2

Archived catalogs

  1. Model B40

    12  Pages

  2. Model J52

    2  Pages

  3. Series 3

    24  Pages

  4. Models T20/T21

    12  Pages

  5. GEMINI™

    20  Pages

  6. Seal Pots

    4  Pages

  7. Echotel® 355

    8  Pages

  8. E4 Modulevel®

    12  Pages

  9. TUFFY® II

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.