Model J52

Model J52

Model J52

Product catalog summary
Description: The Magnetrol Model J52 refrigerant level switches are designed for liquids with a specific gravity of 0.60 and above, utilizing a magnetic principle for reliable performance.
Features:
  • Temperature range: -50° to +100° F (-46° to +38° C).
  • Maximum working pressure: 400 psig (28 bar).
  • Sealed housing to prevent moisture and frost.
  • Field adjustable switch actuation between 0.50 and 1.50 inches.
  • Vibration-resistant mechanism for reliable operation.
  • Various housing options including explosion-proof types.
  • Compatible with commercial refrigerants like ammonia and freon.
Agency Approvals: Models are approved by CSA and FM for non-hazardous and hazardous environments, with specific model numbers for each type.
Model Selection: Quick shipment available through the Expedite Ship Plan (ESP).
Warranty: AMETEK LMS offers a three-year warranty against defects, covering repair or replacement, excluding misapplication or consequential damages.
Technology: The switch uses a permanent magnet and float mechanism to actuate based on liquid level changes, with a static pressure boundary provided by an enclosing tube.
Specifications:
  • Electrical ratings for dry contact non-inductive loads at various voltages.
  • Actuating levels are factory set with internal adjustments available.
See more

Catalog excerpts

Model J52-1

LEVEL MEASUREMENT SOLUTIONS The Magnetrol Model J52 refrigerant level switches are float actuated units designed for use on liquids with 0.60 specific gravity and above. They utilize the Magnetrol magnetic principle to assure dependable performance. • Maximum working pressure to 400 psig (28 bar) • Housing is completely sealed against entrance of moisture, preventing internal frost formation • Conduit seal with 24-inch (610 mm) lead wires prevents entrance of moisture laden air into the switch housing • Float chamber is a welded assembly fabricated from two low carbon steel sections and finished with an epoxy coating • High and low level switch actuation is easily field adjustable between 0.50 and 1.50 inches (13 and 38 mm), factory set for 1.50 • Vibration resistant switch mechanism has been specifically developed to provide reliable and trouble free operation • Housing cover seal of Viton® A o-ring is used betwee housing cover and base to provide an air tight seal • Housing base can be rotated 360° • Baffle plate provided with the switch mechanism to prevent electrical wiring interference • Housing choices of TYPE 4X steel, TYPE 4X/7/9 explosion proof, and TYPE 4 transparent Lexan® • Used with most commercial refrigerants including ammonia, freon, methyl chloride and sulphur dioxide Models available for quick shipment, usually within one week after factory receipt of a complete purchase order, through the Expedite Ship Plan (ESP). MODEL SELECTION

 Open the catalog to page 1
Model J52-2

A permanent magnet © is attached to a pivoted switch actuator and adjustment screw ®. As the float ® rises following the liquid level, it raises the attraction sleeve © into the field of the magnet, which then snaps against the non-magnetic enclosing tube ©, actuating the switch ©. The enclosing tube provides a static pressure boundary between the switch mechanism and the process. On falling level, a spring retracts the magnet, deactivating the switch. WARRANTY All AMETEK LMS mechanical level and flow controls are warranted free of defects in materials or workmanship for three full years from...

 Open the catalog to page 2

Archived catalogs

  1. Model B40

    12  Pages

  2. Series 3

    24  Pages

  3. Models T20/T21

    12  Pages

  4. GEMINI™

    20  Pages

  5. Seal Pots

    4  Pages

  6. Echotel® 355

    8  Pages

  7. E4 Modulevel®

    12  Pages

  8. TUFFY® II

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.