*mydirectindustry

Catalogs
Magnetrol - AMETEK
Energy Management

Energy Management

Product catalog summary

Overview: The Thermatel TA2 thermal mass flow meters by Magnetrol are designed to enhance energy and environmental management by providing precise gas flow measurements without requiring pressure or temperature corrections. These meters are advantageous for regulatory compliance and efficiency improvements.

Specifications: The TA2 meters offer direct thermal mass flow measurement, eliminating the need for density correction inputs. They are capable of measuring low flow rates, with velocities ranging from 10 SFPM (0.05 Nm/s) to 50,000 SFPM (250 Nm/s), and support a turndown rate of 100:1 or more. The design minimizes pipe blockage and pressure drops, and the absence of moving parts reduces maintenance requirements.

Installation and Calibration: TA2 transmitters are designed for easy installation and quick setup, ensuring reliable service. Each unit is calibrated for specific applications and is ready for immediate use. They are competitively priced and available in insertion or inline styles, with "hot tap" assemblies for easy maintenance.

Applications: The TA2 meters are suitable for various applications, including:

Aeration: Optimizes blower efficiency in wastewater treatment by balancing air flows.
Digester Gas: Measures low flow rates in anaerobic digesters, aiding energy co-generation and carbon credit projects.
Landfill Gas: Captures emissions for regulatory reporting and fuel use in co-generation projects.
Coal Mine Methane: Captures venting gases for energy use, reducing emissions.
Compressed Air Systems: Identifies leaks and reduces energy costs by measuring air flow.
Flare Gas: Measures emissions from various sources, with mixed gas calibration capabilities.
Combustion Air Flow: Monitors air flow to furnaces and boilers for efficient fuel use.
Natural Gas Measurement: Provides accurate flow measurements to optimize combustion efficiency.

Standards and Approvals: The TA2 meters comply with FM, FMc, ATEX, and IEC standards and support ISO 50001 energy management systems, applicable across various industries.

Conclusion: Thermatel TA2 thermal mass flow meters are a robust solution for optimizing energy efficiency and reducing environmental impact across multiple industrial applications.

Key Features:

Low pressure drops and no moving parts, reducing maintenance needs.
Engineered for quick setup and rugged operation.
Calibrated for immediate field installation and operation.
Competitive installed cost compared to other technologies.
Agency approvals include FM, FMc, ATEX, and IEC.
Available in insertion or inline styles, with "hot tap" assemblies.
Flow body designs accommodate pipe sizes as small as ½ inch.

Corporate Information: Magnetrol International, headquartered in Downers Grove, Illinois, offers these products as part of their commitment to energy management and environmental responsibility.

Contact Information: For more details, contact Magnetrol through their website or by phone.

Catalog excerpts

Special Applications Series: Flow Instrumentation for Energy Management GO GREEN... THINK BLUE. Think Magnetrol . ® To meet increasing regulatory, environmental, social and bottom line demands, rely on Magnetrol and Thermatel® TA2 mass flow meters for your energy and environmental management solutions.

Open the catalog to page 1

Thermatel TA2 thermal mass flow meters are up to the challenge of your most demanding applications. ® TA2 thermal mass flow meters will help optimize your green energy initiatives by improving measurement of greenhouse gases and making processes less energy intensive and more energy efficient. Thermal dispersion technology Thermal flow meters are primarily used in air and gas flow measurement applications. The meters consist of a transmitter and probe with temperature sensors (RTDs) located in the pins at the bottom of the probe. One sensor measures the process temperature and the other sensor...

Open the catalog to page 2

Aeration basins require air flow to allow microorganisms to efficiently break down the waste in wastewater treatment plants. Challenge: Maintain proper air flows to the sections of the basins. Solution: Measure and balance air flows using the Thermatel TA2. Blower efficiency can also be optimized by measuring the air flow and not running excess air into the basin based on dissolved oxygen (DO) levels. Note: The TA2 is also used for aeration flow measurement in froth flotation applications in the mining industry. Sludge at a wastewater treatment plant goes into an anaerobic digester that produces...

Open the catalog to page 3

Thermatel® TA2 Thermal Mass Flow Meters Breakthrough Performance Thermatel TA2 flow meters deliver significant advantages compared to traditional gas flow measurement technologies. • Direct thermal mass flow measurement doesn’t require pressure or temperature input for density correction, as do many gas flow technologies, such as differential pressure. • Offers excellent low flow sensitivity: mass velocities of 10 SFPM (0.05 Nm/s) to 50,000 SFPM (250 Nm/s) (gas dependent). • Measures low velocities as well as high flow rates for a turndown rate of 100:1 or more. • TA2 probes create negligible...

Open the catalog to page 4

All Magnetrol - AMETEK catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list