1. Catalogs
  2. Magnetrol - AMETEK
  3. E4 Modulevel® Liquid Level Displacer Transmitter

E4 Modulevel® Liquid Level Displacer Transmitter

E4 Modulevel® Liquid Level Displacer Transmitter
1 / 12 PagesView full catalog

E4 Modulevel® Liquid Level Displacer Transmitter

Product catalog summary
Description: The E4 Modulevel® is a two-wire, loop-powered liquid level displacer transmitter that utilizes buoyancy principles to convert liquid level changes into a stable output signal. It features a mechanical design with a vertical in-line configuration for easy installation and is available in various configurations for different applications. It includes microprocessor-based electronics with 4–20 mA/HART® digital output and supports FDT/DTM standards with PACTware™ software for enhanced configuration and diagnostics.
Technology: The device operates on changing buoyancy forces that move a core within a linear variable differential transformer (LVDT), inducing voltages processed into a usable output signal. The enclosing tube provides static isolation between the LVDT and process media.
Applications: Suitable for measuring liquids or slurries in various vessels and conditions, including those with varying dielectric, turbulence, or high fill/empty rates. It can measure liquid/liquid interface levels or density control.
Specifications:
  • Functional Features: Includes a range spring/LVDT design, easy commissioning, SIL 2 certification, HART® communication, and various calibration options.
  • Interface: Custom-made for tracking interface levels of two immiscible liquids and converting them into a stable signal.
  • Specific Gravity: Capable of tracking and converting changes in liquid specific gravity into a stable output signal.
  • PACTware™ Software: Provides a graphical interface for setup and functionality access via a PC connected to the HART loop.
Performance:
  • Level Measurement: Linearity of ±0.50% and repeatability of ±0.20% of full span, with a response time of less than 1 second.
  • Interface Level & Specific Gravity: Linearity of ±0.70% and repeatability of ±0.40% of full span.
Agency Approvals: The device is explosion-proof, flame-proof, intrinsically safe, non-incendive, and dust ignition-proof, meeting various international standards and directives.
Model Numbering: The document provides detailed specifications for model numbers, including design type, power, signal output, accessories, classification, housing, process temperature, and process connection options.
Additional Specifications:
  • Flanges and Construction Codes: Specifications include EN 1092-1 Type B2 and B1 with various DN and PN ratings. Construction codes include ASME B31.1, ASME B31.3, and NACE MR0175/MR0103.
  • Materials of Construction: Specified for different components, such as 316 SST and Carbon Steel.
  • Level Range/Displacer Length: Displacer lengths in millimeters and inches for various pressure classes, with specific lengths for pressures up to 600# (PN 100).
  • Specific Gravity: Ranges for liquids are provided, with options for custom specifications.
  • Housing/Conduit Connection: Options for integral and remote enclosures in aluminum and SST with various connection types.
  • Process Temperature: Maximum temperatures for non-steam and steam applications are specified, with additional notes on field installation considerations.
  • Connecting Cable: Details on cable lengths for temperatures up to and above +400 °F (+204 °C) are provided, with examples for unit conversion.
  • Unit of Measure: Options for English and Metric units are available.
  • Warranty and Quality: AMETEK LMS offers an eighteen-month warranty for defects in materials or workmanship. The quality assurance system is ISO 9001 certified, ensuring high-quality standards and customer satisfaction.
See more

Catalog excerpts

E4 Modulevel® Liquid Level Displacer Transmitter-1

E4 Modulevel® Liquid Level Displacer Transmitter DESCRIPTION The E4 Modulevel® is a loop powered, two-wire instrument, utilizing simple buoyancy principles to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a purely mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications. The E4 Modulevel has microprocessor-based electronics with 4–20 mA/HART® digital output. E4 supports the FDT/DTM standard and a PACTware™ PC software package allows for additional configuration, diagnostics, and trending capabilities. TECHNOLOGY Changing buoyancy forces caused by liquid level change act upon the spring supported displacer causing vertical motion of the core within a linear variable differential transformer. As the core position changes with liquid level, voltages are induced across the secondary windings of the LVDT. These signals are processed in the electronic circuitry and converted to a useable output signal. The enclosing tube acts as a static isolation barrier between the LVDT and the process media. APPLICATIONS MEDIA: Liquids or slurries, clean or dirty, light hydrocarbons to heavy acids (SG=0.23 to 2.20) VESSELS: Process & storage, bridles, bypass chambers, interface, sumps & pits up to unit pressure & temperature ratings. CONDITIONS: Most liquid level measurement and control applications including those with varying dielectric, vapors, turbulence, foam, buildup, bubbling or boiling and high fill/empty rates; liquid/liquid interface level measurement or density cont

 Open the catalog to page 1
E4 Modulevel® Liquid Level Displacer Transmitter-2

• Range Spring/LVDT design yields performance benefits over traditional torque tube displacer transmitters • Easy to commission: local user interface adapted from the latest Magnetrol transmitter releases with graphic LCD available • No level change required for configuration; no field calibration necessary • Safety Integrity Level (SIL) 2 Certified • HART® digital communication (Version 7) with DD and graphical DTM for use with PACT ware • Various field calibration options available; including under process conditions or in the instrument shop • Follows NAMUR NE 43 and NAMUR NE 107 (diagnostic...

 Open the catalog to page 2
E4 Modulevel® Liquid Level Displacer Transmitter-3

® Maximum process temperatures are based on ambient temperatures less than or equal to +49 °C (+120 °F). Higher ambient temperatures require reduced process temperatures. © Consult factory for low temperature applications down to -200 °C (-330 °F). © With aluminum housing only. Does not apply to models with 316 SS transmitter housings.

 Open the catalog to page 3
E4 Modulevel® Liquid Level Displacer Transmitter-5

On remote electronics housing only, seal is required at the enclosure. See appropriate Installation & Operating Manual for entity parameters for IS installation. Entity Parameters: Reference Installation and Operating Manual 48-636 for special conditions of use and agency drawing. TRANSMITTER TERMINAL VOLTAGE Operational Mode ® Start-up current 12 mA minimum. © Allows for loop resistance of at least 250 ohms.

 Open the catalog to page 5
E4 Modulevel® Liquid Level Displacer Transmitter-6

Model E4M with Remote Transmitter Integral Transmitter Head Remote Transmitter Head

 Open the catalog to page 6
E4 Modulevel® Liquid Level Displacer Transmitter-7

X for SIDE/SIDE = Level Range X for SIDE/BOTTOM = Level Range + 4.00" + 'DIM F'

 Open the catalog to page 7
E4 Modulevel® Liquid Level Displacer Transmitter-8

MODEL NUMBER E4 TRANSMITTER WITH DISPLACER ASSEMBLY DESIGN TYPE E 4 M E4 Modulevel — Liquid Level Displacer Transmitter POWER 5 24 VDC, Two-Wire SIGNAL OUTPUT 1 4–20 mA with HART, SIL 2 Certified ACCESSORIES 0 No Digital Display or Keypad; No other accessories included No Digital Display or Keypad; Adjustable displacer hanger cable included (8’ / 2.5m standard) No Digital Display or Keypad; External Chamber included ➀ ➁ Digital Display and Keypad included; No other accessories included Digital Display and Keypad included; Adjustable displacer hanger cable included (8' / 2.5m standard) Digital...

 Open the catalog to page 8
E4 Modulevel® Liquid Level Displacer Transmitter-9

MODEL NUMBER E4 TRANSMITTER WITH DISPLACER ASSEMBLY SPECIFIC GRAVITY — LIQUID 0 ➅ Up to 600# / PN 100 pressure class PROCESS CONNECTION — HEAD FLANGE ➆ ASME FLANGES ➆ If installing Modulevel into Magnetrol/Orion external chamber, select 3” (DN 80) up to 1500# (PN 250) construction & 4” (DN 100) up to 2500# (PN 400) MATERIAL OF CONSTRUCTION (E-TUBE/FLANGE/STEM/DISPLACER/HANGER CABLE) CONSTRUCTION CODES 316 SST flange, e-tube, stem, displacer and cable assembly (if applicable) ➇ Carbon Steel flange; 316 SST e-tube, stem, displacer and cable assembly (if applicable) ➇ Consult factory for 1500# (PN...

 Open the catalog to page 9
E4 Modulevel® Liquid Level Displacer Transmitter-10

MODEL NUMBER E4 TRANSMITTER ONLY DESIGN TYPE E 4 T E4 Modulevel — Transmitter Only POWER 5 24 VDC, Two-Wire SIGNAL OUTPUT 1 4–20 mA with HART, SIL 2 Certified ACCESSORIES 0 No Digital Display or Keypad Digital Display and Keypad included CLASSIFICATION 0 General Purpose, Weatherproof (IP66 & IP67) Explosion Proof / Flameproof (Ex db) Dust Ignition Proof HOUSING / CONDUIT CONNECTION ➀ 0 Integral Aluminum enclosure; 1⁄2" NPT Integral Aluminum enclosure; M20 × 1.5 Remote Aluminum enclosure; 1⁄2" NPT ➁ Remote Aluminum enclosure; M20 × 1.5 ➁ Sunshade available and sold separately. Remote transmitter...

 Open the catalog to page 10
E4 Modulevel® Liquid Level Displacer Transmitter-12

The quality assurance system in place at AMETEK LMS guarantees the highest level of quality throughout the company. AMETEK LMS is committed to providing full customer satisfaction both in quality products and quality service. The AMETEK LMS quality assurance system is certified to ISO 9001, affirming our commitment to internationally recognized quality management standards and continuous improvement. All AMETEK LMS electronic level and flow controls are warranted free of defects in materials or workmanship for eighteen months from the date of original factory shipment. If returned within the...

 Open the catalog to page 12

Archived catalogs

  1. Model B40

    12  Pages

  2. Model J52

    2  Pages

  3. Series 3

    24  Pages

  4. Models T20/T21

    12  Pages

  5. GEMINI™

    20  Pages

  6. Seal Pots

    4  Pages

  7. Echotel® 355

    8  Pages

  8. E4 Modulevel®

    12  Pages

  9. TUFFY® II

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.