1. Catalogs
  2. Magnetrol - AMETEK
  3. Displacer Type Liquid Level Switches

Displacer Type Liquid Level Switches

Displacer Type Liquid Level Switches
1 / 32 PagesView full catalog

Displacer Type Liquid Level Switches

Product catalog summary
Description
AMETEK LMS displacement type level switches are designed for industrial applications, offering various alarm and control configurations. They operate on a buoyancy principle, suitable for both simple and complex applications, such as foaming or surging liquids, and are generally more cost-effective than other types of level switches.
Features
  • Adjustable level ranges with multiple switch mechanisms.
  • Up to 4 set points and 3 switches.
  • Displacers adjustable along a 10-foot suspension cable.
  • Anti-surge design to prevent switch shortcycling.
  • Available in flanged or threaded mounting options.
  • Field adjustable set point and switch differential.
  • Various displacer materials: Porcelain, 316 Stainless steel, Karbate, Brass.
  • Switch mechanisms include Dry contact, Pneumatic, Hermetically sealed.
  • Housing options include NEMA 1 carbon steel and polymer-coated aluminum.
Applications
  • Foaming or surging liquids
  • Agitated fluids
  • Sewage handling
  • Dirty liquids
  • Paints and varnishes
  • Heavy oils
  • Liquids with solids
Technology
The operation is based on buoyancy, where weighted displacers heavier than the liquid cause a spring to move as the liquid level changes. This movement actuates a switch mechanism through a magnetic sleeve and pivoted magnet system.
Proof-er Controls
The PROOF-ER system allows for checking the operation of a displacer control without raising the tank level by simulating a high-level condition.
Floating Rooftop Controls
Designed for floating roof tanks, these controls use a brass weight displacer to prevent sparking and can be customized for specific applications.
Displacers
Stainless steel displacers are rated for 720 psig at +100°F, while Karbate displacers have a temperature range of +32°F to +300°F. Porcelain displacers are not recommended for non-vented boiler water systems over +200°F.
Switch Models
  • Single Switch Models: Series A10 and A15 for wide and narrow differential applications.
  • Dual Switch Models: Series B10 and B15 for wide and narrow differential applications with multiple operating sequences.
  • Tri-Switch Models: Series C10 and C15 for providing three control signals with wide and narrow differential options.
Agency Approvals
Various models have approvals for hazardous locations, including FM, ATEX, and IECEx certifications. Specific conditions of use include non-repairable flamepaths and electrostatic hazard precautions.
Pressure/Temperature Ratings
Pressure ratings vary by model and material, with specific ratings for threaded and flanged models. Temperature classifications are provided for different process temperatures.
Specifications
  • Switch Mechanisms: Include pneumatic, dry contact, and hermetically sealed options with various electrical ratings.
  • Enclosures: Available in aluminum and other materials with hazardous location approvals.
Tank Connection and Displacers
Various tank connection options are available, including threaded and flanged connections with different pressure ratings. The material options for displacers include porcelain, 316 SS, and Karbate. Specific codes are provided for each configuration, with certain limitations on material availability.
Electric Switch Mechanism and Enclosure
Switch mechanisms are available in Series O and Q, with temperature ranges from -40 to +300°F. Enclosures are made of aluminum and are certified for specific FM groups. Each instrument is factory calibrated for specific gravity values.
Warranty
AMETEK LMS offers a three-year warranty against defects in materials or workmanship. The warranty covers repair or replacement, excluding transportation costs. Liability for misapplication or consequential damages is not covered.
Quality Assurance
The quality assurance system at AMETEK LMS is ISO 9001 registered, ensuring high-quality standards and customer satisfaction.
See more

Catalog excerpts

Displacer Type Liquid Level Switches-1

LEVEL MEASUREMENT SOLUTIONS • Foaming or surging liquids • Agitated fluids • Sewage handling • Dirty liquids • Heavy oils • Liquids with solids AMETEK LMS displacement type level switches offer the industrial user a wide choice of alarm and control configurations. Every unit utilizes a simple buoyancy principle and is well suited for simple or complex applications, such as foaming or surging liquids or agitated fluids, and usually costs less than other types of level switches. • Narrow or wide level ranges achieved through multiple switch mechanism capability. • Displacers adjustable at any point along the suspension cable. • 10 feet (3 meters) suspension cable standard. • Anti-surge design eliminates the possibility of switch shortcycling. • Flanged or threaded mounting available. • Easy installation. • Field adjustable set point and switch differential. • NACE models. • Floating rooftop models. • Proof-er® ground check. • Choice of displacers: Porcelain, 316 Stainless steel, Karbate, Brass. • Choice of switch mechanisms: Dry contact, Pneumatic, Hermetically sealed. • Available housings: NEMA 1 carbon steel for pneumatic Polymer coated aluminum with various approvals for e

 Open the catalog to page 1
Displacer Type Liquid Level Switches-2

TECHNOLOGY Operation is based upon simple buoyancy, whereby a spring is loaded with weighted displacers which are heavier than the liquid. Immersion of the displacers in the liquid results in buoyancy force change, which moves the spring upward. Since the spring moves only when the level moves on a displacer, spring movement ➀ is always a small fraction of the level travel between displacers ➁. A magnetic sleeve ➂ is connected to the spring and operates within a non-magnetic barrier tube ➃. Spring movement causes the magnetic sleeve to attract a pivoted magnet ➄, actuating a switch mechanism...

 Open the catalog to page 2
Displacer Type Liquid Level Switches-3

SINGLE SWITCH MODELS SERIES A10 AND SERIES A15 SERIES A10 PUMP OR VALVE CONTROL WIDE DIFFERENTIAL TYPE SERIES A15 LEVEL ALARM APPLICATIONS NARROW DIFFERENTIAL TYPE These wide differential units are factory calibrated to actuate as a liquid level reaches a given displacer and to deactuate when the level reaches a second displacer. These instruments are factory calibrated to operate over a narrow level differential band and are ideally suited for liquid level alarm applications on either high or low level. The minimum differential band is approximately 6 in. (152 mm) in water and varies somewhat...

 Open the catalog to page 3
Displacer Type Liquid Level Switches-4

AGENCY APPROVALS EMC directive 2014/30/EU (electromagnetic compatibility) The following standard has been applied: EN 61326-1:2013-(Low Voltage Directive-CE) 705 ENTERPRISE ST AURORA, IL 60504 USA MADE BY: 9240 ZELE BELGIUM INPUT: OUTPUT: Approval: FM Type 4X 005-8047-003 Housing Material: Carbon Steel/Aluminum MODEL NO SERIAL NO INPUT: OUTPUT: MANUF YEAR: FM21US0099X\FM21CA0066X CL I DIV 1 GPS B,C,D T6...T1 CL II DIV 1 GPS E,F,G CL III SINGLE SEAL SEAL AT THE ENCLOSURE/ SCELLER A L ENCEINTE CABLE ENTRY AMB TEMP: -40 C TO 70 C MANUF. YEAR: 705 ENTERPRISE ST AURORA, IL 60504 USA MADE BY: 9240...

 Open the catalog to page 4
Displacer Type Liquid Level Switches-5

AGENCY APPROVALS 705 ENTERPRISE ST AURORA, IL 60504 USA MADE BY: 9240 ZELE BELGIUM VAC/A VDC/A CABLE ENTRY AMB TEMP: -40 C TO 70 C MANUF. YEAR: Approval: ATEX/IECEx 005-8060-008 Housing Material: Aluminum 705 ENTERPRISE ST AURORA, IL 60504 USA MADE BY: 9240 ZELE BELGIUM VAC/A VDC/A CABLE ENTRY AMB TEMP: -40 C TO 70 C MANUF. YEAR: Approval: ATEX/IECEx Housing Material: Cast Iron s based on each individual model as mention in each individual manual.

 Open the catalog to page 5
Displacer Type Liquid Level Switches-6

Maximum Pressure Ratings: These are the ranges of process pressure ranges based on each individual model as mention in each individual manual. © Models with stainless steel displacers are rated 720 psig @ +100 °F (50 bar @ 38 °C). © Cryogenic construction available upon request. Consult factory with application details.

 Open the catalog to page 6
Displacer Type Liquid Level Switches-7

SERIES B, C, D, O & QDRY CONTACT SWITCHES • Series “B”, “C”, “O” and “Q” switches are general purpose units with a selection of maximum liquid temperature ratings • Series “D” switch is designed for high DC current applications • Suited for process industry applications in hazardous locations or where electrical power is not available • Series “J” bleed type switch is intended for general purpose applications • Series “K” switch is specially designed to provide non-bleed operation with a high degree of vibration resistance SWITCH ENCLOSURES • Aluminum with various hazardous location approvals...

 Open the catalog to page 7
Displacer Type Liquid Level Switches-8

Displacer Type Electrical Connections Electrical Switches: 1" NPT Pneumatic Switches: V4" NPT STANDARD ACTUATING LEVELS AND LIQUID SPECIFIC GRAVITY Displacer Model A10with Threaded Mountingwith Flanged Mounting 8

 Open the catalog to page 8
Displacer Type Liquid Level Switches-9

Note: All levels ±0.25" (6). *See page 26 for PROOF-ER and/or floating rooftop switch dimensions.

 Open the catalog to page 9
Displacer Type Liquid Level Switches-10

SPECIFICATIONS MODEL B10 DIMENSIONAL DATA MODEL B10 WITH DISPLACER ARRANGEMENTS 3, 4, AND 5 INCHES (MM) Outline Dimensions Displacer Type Threaded Mounting Flanged Mounting Stainless Steel or Karbate Displacer Type Stainless Steel or Karbate Electrical Connections Electrical Switches: 1" NPT MODEL B10 WITH DISPLACER ARRANGEMENTS 1 AND 2 Displacer Type Stainless Steel or Karbate Plug Flange Model B10 with Threaded Mounting Model B10 with Flanged Mounting

 Open the catalog to page 10
Displacer Type Liquid Level Switches-12

SPECIFICATIONS MODEL B10 ACTUATION LEVELS INCHES (MM) B10 Standard actuating levels and liquid specific gravity with displacer arrangement 1 Displacer Type Liquid Temp Level °F Stainless Steel Actuation Upper Switch Actuation Model B10 Displacer Arrangement 1 F Upper Switch Actuation Lower Switch Actuation

 Open the catalog to page 12
Displacer Type Liquid Level Switches-13

MODEL B10 ACTUATION LEVELS (CONT.) B10 Standard actuating levels and liquid specific gravity with displacer arrangement 2

 Open the catalog to page 13
Displacer Type Liquid Level Switches-15

Upper Switch Lower Switch Upper Switch Lower Switch Upper Switch Lower Switch

 Open the catalog to page 15
Displacer Type Liquid Level Switches-17

Upper Switch Lower Switch Upper Switch Lower Switch Upper Switch Lower Switch

 Open the catalog to page 17

Archived catalogs

  1. Model B40

    12  Pages

  2. Model J52

    2  Pages

  3. Series 3

    24  Pages

  4. Models T20/T21

    12  Pages

  5. GEMINI™

    20  Pages

  6. Seal Pots

    4  Pages

  7. Echotel® 355

    8  Pages

  8. E4 Modulevel®

    12  Pages

  9. TUFFY® II

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.