MATERIAL HANDLING 2. Select Wheel Configuration H-Steel Main Wheels J-Steel Main Wheels with Grease Fittings K-Steel Main Wheels & Anti-Lift Wheels L-Steel Main Wheels & Anti-Lift Wheels with Grease Fittings M-Steel Main Wheels, Side Guide Wheels N-Steel Main Wheels, Side Guide with Grease P-Steel Main Wheels, Side Guide Wheels & Anti- Lift Wheels R-Steel Main Wheels, Guide Wheels & Anti-Lift Wheels with Grease Fittings S-Polyurethane Main Wheels, Side Guide Wheels T-Polyurethane Main Wheels, Side Guide Wheels with Grease Fittings V-Polyurethane Main Wheels, Side Guide Wheels & Anti-Lift Wheels* W-Polyurethane Main Wheels, Side Guide Wheels & Anti-Lift Wheels* with Grease Fittings 0-No Wheels (Cable Clamp and Tow Clamp) *-Anti-Lift Wheels are only available in steel 3. Select Saddle Configuration A4-4" Radius Saddle/12" Saddle Width x 1" Depth B4-4" Radius Saddle/16" Saddle Width x 1" Depth C4-4" Radius Saddle/25" Saddle Width x 1" Depth D4-4" Radius Saddle/12" Saddle Width x 2" Depth E4-4" Radius Saddle/16" Saddle Width x 2" Depth F4-4" Radius Saddle/25" Saddle Width x 2" Depth A6-6" Radius Saddle/12" Saddle Width x 1.25" Depth B6-6" Radius Saddle/16" Saddle Width x 1.25" Depth C6-6" Radius Saddle/25" Saddle Width x 1.25" Depth □6-6" Radius Saddle/12" Saddle Width x 2.25" Depth E6-6" Radius Saddle/16" Saddle Width x 2.25" Depth F6-6" Radius Saddle/25" Saddle Width x 2.25" Depth A8-8" Radius Saddle/12" Saddle Width x 1.75" Depth B8-8" Radius Saddle/16" Saddle Width x 1.75" Depth C8-8" Radius Saddle/25" Saddle Width x 1.75" Depth □8-8" Radius Saddle/12" Saddle Width x 2.75" Depth E8-8" Radius Saddle/16" Saddle Width x 2.75" Depth F8-8" Radius Saddle/25" Saddle Width x 2.75" Depth AO-10" Radius Saddle/12" Saddle Width x 2.25" Depth BO-10" Radius Saddle/16" Saddle Width x 2.25" Depth CO-10" Radius Saddle/25" Saddle Width x 2.25" Depth 4. Select Cable Clamping Method A-Nylon Cable Ties B—Bar Clamp-1 Point Clamping C-Bar Clamp-2 Point Clamping 5. Select Lower Saddle (2nd) Use same identifiers as saddle selector. NOTE: The 2nd saddle must have a 2" lower radius as the Is' upper saddle. Select (00) if lower saddle is not needed. 6. Select Cable Clamping Method (2nd) A-Nylon Cable Ties B—Bar Clamp-1 Point Clamping C-Bar Clamp-2 Point Clamping 7. Select Lower Saddle (3rd) Use same identifiers as saddle selector. NOTE: The 3d saddle must have a 2" lower radius as the 2"1 middle saddle. Select (00) if lower saddle is not needed. 8. Select Cable Clamping Method (3rd) A-Nylon Cable Ties B-Bar Clamp-1 Point Clamping C-Bar Clamp-2 Point Clamping 9. Select l-Beam Size 0-No beam reference tow cable clamp and fixed cable clamp 10. Select Material Finish SF-Standard finish zinc plated with gold dichromate finish. HD-Hot dipped galvanized finish SS-Stainless Steel

MATERIAL HANDLING An intermediate trolley with steel main and side guide wheels, a 10"R x 25" x 2.25" high saddle (with 2 point bar cable clamps) and a 8"R x 16" xl .75" high 2nd saddle (with 2 point _ bar cable clamps), no 3rd saddle or bar standard finish. The model number would be: "M" Series Trolley _l 4. Cable Clamp Type- 6. Cable Clamp Type (2nd) Cable Organizers Cable organizers are used to prevent cables from tangling. Steel strips with a row of holes that can be used on the bottom of cable loops with heavy-duty nylon cable ties to cable cables organized. • Bulk Cable Organizers Steel...