Insulated Conductor Bar System need high amperage power delivery for a heavy duty application, ELECTROBAR® nsulated Conductor Bar System is the solution. • ELECTROBAR HX Systems accommodate up to 600 Volt AC and • Line elements are available to carry 400, 700 and 1000 amps continuous current. • Rated for use in environments up to 160° F ambient temperature. • Aluminum alloy extruded line elements with stainless-steel lined contact surface provide better performance and increased durability. • Inverted V contact surface for positive tracking of collector shoes. • Grounding conductor bar available with green cover for ease • HX Systems are designed for bottom entry only. Not intended for lateral (side entry) applications. EXPANSION ELEMENTS Expansion sections are used for long runways to allow for thermal expansion of the conductor bar. They are also used at expansion joints in A 10 foot long expansion section is required for every 300 feet of conductor run. For example, a 600 foot long installation would require an expansion section only in Anchor pins are included with each expansion section. Joint Assembly Kit connection assemblies are available to assure full current carrying capacity without interfering with free travel of collector contacts. The joint assembly is designed to automatically align conductor bar sections during installation. Fastening hardware ensures a good, tight electrical and mechanical joint between conductor sections. The joint assembly kit includes the insulating joint cover. Approximate Shipping Weight Catalog Number YOUR ONE-STOP SOURCE FOR MATERIAL HANDLING CONTROL SOLUTIONS

HANGER ASSEMBLY Polymer Snap-In Hangel Steel Hangei Steel Hangei To provide support of conductor sections, choose from polymer snap-in, steel, or insulated steel hanger assemblies. Hanger assemblies accommodate a minimum conductor spacing of 4 inches. MOUNTING BRACKET available in 24 inch lengths with mounting holes punched every two inches. Mounting hardware COLLECTOR ASSEMBLIES Collector assemblies are offered in single or double shoe designs. They provide continuous current pick up from 200 through 400 amperes. The contact shoes are mechanically supported by an insulating support assembly...