Group: Columbus McKinnon
Catalog excerpts
BRAKETRONIC® SYSTEMS “Brake By Wire” Hydraulic brake systems tend to leak and create maintenance and environmental issues. Magnetek’s Braketronic System is the solution! Used on the traverse motions of your overhead crane, the Braketronic package allows for the removal of the entire hydraulic brake system and replaces it with state-of-the-art “brake by wire” technology. With the Magnetek Braketronic Controller, single or multiple Mondel thruster operated brakes can be proportionally controlled by a foot pedal, master switch, radio control, or selectively from either one. Magnetek’s Braketronic Controller provides adjustable torque control to the Mondel thruster operated shoe or disc brakes and also provides fail-safe emergency braking. When a foot pedal is not required, the controller can also be congured to gradually apply the brakes by using a pre-programmed ramping sequence that is initiated by the use of a single-step control device such as a master switch or radio control. The Braketronic Controller is ideal for new applications or replacement of existing hydraulic brake systems. BRAKETRONIC UNIT INCLUDES ■ Braketronic Controller ■ Standard Pre-Engineered Panel ■ Mill Duty Foot Pedal (Optional) FEATURES ■ Adjustable torque brake performance, controlled from foot pedal or radio control ■ Pre-programmed ramping controlled by push-button ■ Drift point compatible ■ Voltages: 250V DC, 230/460/575V AC-3Ph, 115/230-Single Ph ■ Control single or multiple brakes ■ All types of cranes ■ Moveable lift bridges ■ Transfer cars ■ Industrial or Mill Duty ■ All components are UL Listed and include factory testing ■ Drop-in brake designs available ■ Custom application engineering available
Open the catalog to page 1STANDARD PRE-ENGINEERED PANEL INCLUDES ■ Electromotive IMPULSE® G+ Series 3 Adjustable Frequency Crane Control with keypad ■ 120 Volt control voltage interface card ■ Branch circuit fusing ■ Brake contactor ■ Dynamic Braking Resistor(s) ■ Wiring to a single terminal strip ■ Built in electronic motor thermal overload protection ■ Clearly marked wires (at both ends) ■ NEMA 4/12 enclosures with a continuous hinge ■ DC panels include DC Buss Choke ■ All components are UL Listed and include factory testing, bill of materials, and computer-generated power and control circuit schematics. MILL DUTY...
Open the catalog to page 2All Magnetek catalogs and technical brochures
-
ReFlx® 45 Brochure
1 Pages
-
impulse_series_4
16 Pages
-
FLEX VUE Wireless Controls
2 Pages
-
COLLISION AVOIDANCE SYSTEMS
2 Pages
-
Cable Reels Brochure
2 Pages
-
Magnetek Full Circle Service
6 Pages
-
Black Max® Motors
4 Pages
-
IMPULSE®•T
2 Pages
-
DataLogger Series 4
1 Pages
-
IMPULSE®•G+ Mini
8 Pages
-
IMPULSE®•G+ Series 4
16 Pages
-
Engineered Systems & Solutions
16 Pages
-
Marine Terminal Family
8 Pages
-
Brake Accessories Brochure
2 Pages
-
Collision Avoidance Brochure
2 Pages
-
MH445_SBN
2 Pages
-
Enrange? Flex M Receiver
2 Pages
-
Enrange? CAN-6 Receiver
2 Pages
-
Telemotive MBT
2 Pages
-
Telemotive XLTX?
2 Pages
-
Telemotive SLTX?
2 Pages
-
Telemotive MLTX?
2 Pages
-
Telemotive telePendant?
2 Pages
-
Telemotive Flex VUE®
2 Pages
-
Enrange? Flex EX Series
2 Pages
-
OmniPulse? DSD DC Control
2 Pages
-
IMPULSE®?R
2 Pages
-
MAC??2000 Soft Starts
2 Pages
-
IMPULSE®?G+ Mini
6 Pages
-
IMPULSE®?G+ Series 4
16 Pages
-
Telemotive MLTX2?
2 Pages
-
Blue Max® Motors
6 Pages
-
IMPULSE®?T
2 Pages
-
ReFlx® 120
2 Pages
-
Enrange 300T
2 Pages
-
Telemotive telePendant
2 Pages
-
Enrange Flex Pro Series
2 Pages
-
Enrange Flex EX Series
2 Pages
-
Plug & Play Festoon System
1 Pages
-
Mill Duty I-Beam Festoon
6 Pages
-
Heavy Duty I-Beam Festoon
4 Pages
-
C-Track Festoon Systems
4 Pages
-
FABA Conductor Rail System
2 Pages
-
Electrobar HX Full Brochure
2 Pages
-
MAC.2000
2 Pages
-
Complete Control Panels
2 Pages
-
DataLogger Series 3+
1 Pages
-
OmniPulse DSD DC Controls
2 Pages
-
IMPULSE®?G+ Mini Brochure
6 Pages