Reversing Linear Solenoid, Double proportional solenoid, Double acting solenoid, Magnetbau-Schramme-E

Product catalog summary

Introduction
This document provides technical details on two types of solenoids: the Reversing Linear Solenoid Typ GE1 and the Double Proportional Solenoid Typ GD1, developed by Magnetbau Schramme. These solenoids are designed for specific customer needs and are not available as standard stock products.

Reversing Linear Solenoid Typ GE1
Function: The GE1 solenoid consists of two magnet systems that enable the armature to move between two end positions using electromagnetic force. The direction is controlled by exciting the respective solenoid coil.
Operation: The plunger's movement is determined by the excitation of the coil, with force characteristics that rise during the final 20% of travel.
Installation Instructions: The solenoid can be installed in any position, but power transfer should be axial to avoid lateral loads. Key specifications include a nominal supply voltage of 24 VDC, a 100% duty cycle, insulation class "H", a limiting temperature of 180°C, and IP 65 protection.

Technical Data for GE1
The document provides detailed technical data for various models of the GE1 solenoid, including stroke length, power at 20°C, force at stroke start and end, and weight.

Double Proportional Solenoid Typ GD1
Function: The GD1 solenoid also consists of two magnet systems and is designed to move the armature from a center position to either end position. It achieves twice the stroke of a reversing solenoid of the same size.
Characteristics: Similar to the GE1, the force characteristics rise during the final 20% of travel, and the solenoid is maintenance-free.
Installation Instructions: Installation guidelines are similar to the GE1, with the same electrical and thermal specifications.

Technical Data for GD1
Technical data for the GD1 solenoid models are provided, including stroke from the middle position, power at 20°C, force at stroke start and end, and weight.

Conclusion
Both solenoid types are designed for specific applications, offering different stroke capabilities and installation flexibility. For further customization and application-specific solutions, customers are encouraged to contact Magnetbau Schramme.

Catalog excerpts

Reversing Linear Solenoid, Double proportional solenoid, Double acting solenoid, Magnetbau-Schramme-E-1

1 Reversing linear solenoid Typ GE1 and Double proportional solenoid Typ GD1 The following electromagnets are examples for Reversing Solenoids or Double proportional Solenoids (Double acting solenoids) realized in series. Magnetbau Schramme developments are customer-specific. If you are searching for the right electromagnet or solenoid for your series project, simply contact us for the perfect solution. Our team will help you - guaranteed. Please note that we do not have „ex stock“ standard products, and can therefore only process inquiries for series. The difference between both systems The GD1 specialized linear solenoids are used to effect stroke from the center position to the right or left end position. The stroke motion of the armature takes place by means of electromagnetic force of the respective solenoid coil. The solenoid is reset to the center position via external forces. Compared to a reversing linear solenoid, a double-proportional solenoid accomplishes twice the stroke (in mm) at the same size. The characteristic curves decline appropriately. .

Open the catalog to page 1

Reversing Linear Solenoid, Double proportional solenoid, Double acting solenoid, Magnetbau-Schramme-E-2

2 reversing linear solenoid, double proportional solenoid, umkehrhubmagnet, doppelhubmagnet-magnetbau-schramme-elektromagnete-ge1, gd1 © Magnetbau Schramme GmbH & Co. KG Reversing linear solenoid Typ GE1 Function Electromagnets or solenoids designed as reversing linear solenoids consist of two magnet systems. The stroke motion of the armature from one end position to the other or opposite is effected by means of electromagnetic force. The desired operating direction is determined via excitation of the respective solenoid coil. Operation Reversing solenoids consist of two electromagnet systems....

Open the catalog to page 2

Reversing Linear Solenoid, Double proportional solenoid, Double acting solenoid, Magnetbau-Schramme-E-4

4 reversing linear solenoid, double proportional solenoid, umkehrhubmagnet, doppelhubmagnet-magnetbau-schramme-elektromagnete-ge1, gd1 © Magnetbau Schramme GmbH & Co. KG Double proportional solenoid Typ GD1 Funktion Double-proportional solenoids or Double Acting Solenoid consist of two magnet systems. These specialized linear solenoids are used to effect stroke from the center position to the right or left end position. The stroke motion of the armature takes place by means of electromagnetic force of the respective solenoid coil. The solenoid is reset to the center position via external forces....

Open the catalog to page 4