Overview
The document provides technical specifications and operational details for the GC2 series of linear solenoids, also known as DC single linear solenoids, developed by Magnetbau Schramme. These solenoids are designed for universal applications and are customized for series production.

Operation
The DG-linear solenoid operates by moving its armature from the initial to the final position using electromagnetic forces, with the return facilitated by external forces. It can be configured for both drawing and pushing forces and is noted for its long service life due to precise bearing design.

Characteristics
The solenoids exhibit a linear to slightly rising magnetic force/stroke characteristic over the initial 80% of the stroke, with the magnetic force doubling at the end of the stroke.

Installation Guidelines
Power transfer should occur only in the axial direction to avoid lateral loads on the plunger. The technical introduction guidelines must be followed during installation.

Nominal Data

• Nominal supply voltage: 24 VDC
• Relative duty cycle: 100%
• Insulation class: H (VDE 0580)
• Limiting temperature: 180°C
• Degree of protection: IP 00 (DIN 40050)
• Electric connection: Two leads, approx. 200mm

Technical Data
The document includes detailed tables for solenoids GC2 020 to GC2 165, covering magnetic force, stroke work, power consumption, and pull-up/release times across different duty cycles. It also provides installation dimensions for each solenoid type.

Key Specifications

• GC2 020 to GC2 045: Magnetic force ranges from 3N to 60N, with power consumption from 0.5W to 48W.
• GC2 050 to GC2 165: Magnetic force ranges from 10N to 1000N, with power consumption from 15W to 400W.

Installation Drawings
Dimensions and installation options, including pulling/pushing configurations and options with flange or cover hood, are provided for solenoids GC2 050 to GC2 165.