Electromagnetically actuated shotbolt lock unit G SC X ... B01 + ZBW Product group Funktion zz Pull type (de-energized locked) or push type (de-energized unlocked) zz Installed return spring zz With and without signal switch Construction zz Central fastening, alternative fastening via fastening angle Z BW zz 3 sizes ø (mm) 37, 45, 63 zz Maintenance free bearings with high service life zz Robustly built stainless locking bolt zz Insulation materials of the excitation winding correspond to thermal class H zz Electrical connection solenoid via plug connector type Z KB according to DIN EN 175301-803 zz Electrical connection signal switch via circular connector M12x1, four pole, coding A zz Protection class according to DIN VDE/DIN EN 60529 when properly installed: IP40 Application examples zz Blocking, limiting, interlocking of mechanical devices of all kind e.g. of doors and flaps Options zz Further electrical connections zz Monitoring of the shotbolt position via sensor zz Further fastening types e.g. frontal threaded bores and central flange zz Versions with higher protection class zz Please contact us for application related solutions Standards zz Design and testing according to DIN VDE 0580 zz Quality management to ISO 9001 Magnet-Schultz GmbH & Co. KG • Allgäuer Straße 30 • D-87700 Memmingen • Tel. +49 83 31 10 40 • www.magnet-schultz.com

Operating mode Reference temperature ϑ13 Max. Surface temperature Magnetic force FM Admissible lateral force in normal position Service life under aboratory conditions 1) Operating mode Reference temperature ϑ13 Max. Surface temperature Magnetic force FM Admissible lateral force in normal position Service life under aboratory conditions 1) Operating mode Reference temperature ϑ13 Max. Surface temperature Magnetic force FM Admissible lateral force in normal position Service life under aboratory conditions 1) 1) Laboratory conditions for endurance test:: • Rated voltage 24V DC, • Room temperature,...

Information and remarks concerning European directives can be taken from the correspondent information sheet which is available under Produktinfo.Magnet-Schultz.com. The force values indicated in the tables refer to 90 % of the rated voltage, (UN = 24 V, for other voltages deviations of magnetic force may occur) and in the normal operating temperature. Please make sure that the described devices are suitable for your application. Our offers for these devices are based on the assumption of maximal 8 in an FMEA severity table, i. e. in case of malfunction of the device model as offered, there is,...

Dimensional drawing and characteristic curve G SC X 037 M30 B01 (pull-type) Protective conductor MSM, order no., type, voltage and ED stamped Optional accessory fastening angle Z BW 037 A01 (to be ordered separately if required) Fig. 3: Description in de-energised condition Armature rod Fig. 4: Description in energised condition Fig. 5: Magnetic force-stroke-characteristic and return spring By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability reserved

Dimensional drawing and characteristic curve G SC X 037 N30 B01 (push-type) Protective conductor MSM, order no., type, voltage and ED stamped Armature rod Optional accessory fastening angle Z BW 037 A01 (to be ordered separately if required) Fig. 6: Description in de-energised condition Fig. 7: Description in energised condition Fig. 8: Magnetic force-stroke-characteristic and return spring By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability reserved

Dimensional drawing and characteristic curve G SC X 037 M30 B10 (pull-type with limit switch) Protection cap Plug connector EN 175301-803-A002M MSM, order no., type, voltage and ED stamped Circular connector M12x1, 4 pole, A-coded Protective conductor Plastic cap, black Optional accessory fastening angle Z BW 037 A01 (to be ordered separately if required) magnet spring Fig. 9: Magnetic force-stroke-characteristic and return spring By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability reserved...

Dimensional drawing and characteristic curve G SC X 037 N30 B10 (push-type with limit switch) Protection cap Plug connector EN 175301-803-A002M Circular connector M12x1, 4 pole, A-coded MSM, order no., type, voltage and ED stamped readable Protective conductor Optional accessory fastening angle Z BW 037 A01 (to be ordered separately if required) magnet spring Fig. 10: Magnetic force-stroke-characteristic and return spring By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability reserved

Dimensional drawing and characteristic curve G SC X 045 M30 B01 (pull-type) Protection cap Protective conductor Plug connector EN 175301-803-A002M MSM, order no., type, voltage and ED stamped Optional accessory fastening angle Z BW 037 A01 (to be ordered separately if required) Fig. 11: Description in de-energised condition Armature rod Fig. 12: Description in energised condition Fig. 13: Magnetic force-stroke-characteristic and return spring By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability...

Dimensional drawing and characteristic curve G SC X 045 N30 B01 (push-type) Protection cap Protective conductor MSM, order no., type, voltage and ED stamped Armature rod Optional accessory fastening angle Z BW 037 A01 (to be ordered separately if required) Fig. 14: Description in de-energised condition Shotbolt Fig. 15: Description in energised condition Fig. 16: Magnetic force-stroke-characteristic and return spring By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability reserved