Optionally with or without armature Product group G MH G ZZ Function zz High holding force zz Increasing force vs. stroke characteristic zz Gimbal mounted armature Construction zz Fastening via thread bores on the rear side zz Insulation materials of the excitation winding correspond to thermal class F zz Electrical connection via free flexible lead ends or via bipolar clamp zz Protection class according to DIN VDE/DIN EN 60529 when it is properly installed zz Free flexible lead ends: IP 00 zz bipolar clamp: IP 20 zz Pole face zinc-coated Fig. 1: olding magnet with armature H Type G MH X 065 X20 A11 and Type G ZZ E 065 X00 A01 Application examples zz Mechanical engineering and fixture construction, conveyor technology, door holding systems zz Interlocking of all sorts zz Use as control solenoid for short strokes Options zz Protection class IP 65 on request Standards zz Design and testing according to DIN VDE 0580 zz Quality management to ISO 9001 Magnet-Schultz GmbH & Co. KG • Allgäuer Straße 30 • D-87700 Memmingen • Tel. +49 83 31 10 40 • www.magnet-schultz.com

Operating mode Armature thickness Holding force) Magnetic force FM2) at stroke of 0mm with armature G ZZ E Magnetic force FM (N) (mit Prüfkörper) 1) For corrosion protection, the device’s pole surfaces are galvanized, as is the whole device surface. So the retention forces are reduced by 10% in comparison to models with blank pole surfaces. 2) The armatures are protected against corrosion by nickel coating. Due to the insulating nickel layer, an artificial air gaps comes into existence so that the adjacent magnetic force’s values can be measured. In the interest of a low surface temperature,...

Dimension tables G MH X Size Solenoid without armature b 2 pole terminal clamp Connection side Specimen (armature) 9 SMn 28, polished, surface roughness max. 15 µm * e cannot exceed the thread depth t, this could damage the coil. W Information and remarks concerning European directives can be taken from the correspondent information sheet which is available under Produktinfo.Magnet-Schultz.com. l3 Connection side Specimen (armature) 9 SMn 28, polished, surface roughness max. 15 um Please make sure that the described devices are suitable for your application. Our offers for these devices are based...

l5 l4 Design with pin-socket on request Type code G MH X 050 X 20 A11 Device group Series Modifications Size in the series Execution in the series Protection code Design number Order example (Holding magnet without armature) Type Voltage Operating mode (Holding magnet with armature) Type Voltage Operating mode Permanent holding magnets see part list G MP ... B01. Specials designs Please do not hesitate to ask for our assistance with the solution of your application-oriented task. In order to find rapidly a reliable solution we need complete details about your application conditions. The details...