Electromagnetically actuated shotbolt lock unit Product group G HU Z 050 zz According to DIN VDE 0580 zz Increasing force vs. stroke characteristic zz Separately guided shotbolt zz Pull type (de-energized locked) or push type (de-energized unlocked) zz Installed return spring zz Maintenance free bearings with high service life zz With and without signal switch zz Insulation materials of the excitation winding correspond to thermal class F zz Electrical connection and protection class when properly installed: zz Plug connection by spade connectors according to DIN 46247 Protection class according to DIN VDE 0470 / DIN EN 60529 – IP 00 zz Plug connection via plug connector type Z KB according to DIN EN 175301-803 Cable gland (4 times 90° rotatable) Protection class according to DIN VDE 0470 / DIN EN 60529 – IP 54 zz For connection of signal switch cable gland PG 7 zz Fastening with 2 tapped holes zz Please contact us for application related solutions zz Application examples (according to health and safety at work regulations and according to accident preventing regulations): Interlocking of protectors of machines of all sorts Magnet-Schultz GmbH & Co. KG • Allgäuer Straße 30 • D-87700 Memmingen • Tel. +49 83 31 10 40 • www.magnet-schultz.com

Technical data The magnetic armature and the shotbolt are guided separately in maintenance-free bearings. The multi-directional play of the coupling avoids the lateral forces on the armature bearing, which ensures a high function security and a long service life. The locking units of type G HU Z have to comply with the requirements according to health and safety at work regulations and according accident preventing regulations. The armature movement through electromagnetic force is pulling or pushing depending on the respective execution. The reset in the stroke start position is achieved by...

MSM production no. type, voltage and operating mode stamped Dimension table MSM production no. type, voltage and operating mode stamped Fig. 3: ype G HU Z 050 E43 A01 T Pull type (de-energized locked) MSM production no. type, voltage and operating mode stamped Fig. 4: ype G HU Z 050 H43 A01 T Push type (de-energized unlocked) Fig. 5: ype G HU Z 050 E43 A03 T Pull type (de-energized locked) Circuit diagram Control unit closed By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability reserved

MSM production no. type, voltage and operating mode stamped Circuit diagram Control unit closed Fig. 6: ype G HU Z 050 H43 A02 T Push type (de-energized unlocked) Through electromagnetic force the armature moves in the direction of the arrow. The reset in the start position is effected by the built-in spring. The respective switch reacts within approx 1 mm before the end of the lock stroke and announces the correct snapping in. The here shown solenoids are no ready for use devices in the sense of DIN VDE 0580.The general requirements and protective measures to be taken by the user are included...