Electromagnetically Actuated Shotbolt Lock Units Product group G HU Z 017 Function zz Pull type (de-energized locked) or push type (de-energized unlocked) zz Installed return spring zz Almost linear magnetic force vs. stroke characteristic Construction zz Flange mounting zz Maintenance free bearings with high service life zz Execution with and without impact damping in the end positions zz Robustly built stainless locking bolt zz Insulation materials of the excitation winding correspond to thermal class F zz Electrical connection via receptacles according to DIN 46247 or plug connector zz Protection class according to DIN VDE/DIN EN 60529, when properly installed zz Receptacles according to DIN 46247 IP 00 zz Plug connection via plug connector according to DIN EN 175301-803 design CI 9.4 mm with flat seal IP54 Application examples zz Interlocks and tumbler locks of all kinds Options zz Flange in plastic zz Please contact us for application related solutions Standards zz Design and testing according to DIN VDE 0580 zz Quality management to ISO 9001 Magnet-Schultz GmbH & Co. KG • Allgäuer Straße 30 • D-87700 Memmingen • Tel. +49 83 31 10 40 • www.magnet-schultz.com spring s mm Fig. 2: Force vs. stroke c

Technical data G HU Z 017 Operating mode Maximal transverse load: Shotbolt in normal position in motion Information and remarks concerning European directives can be taken from the correspondent information sheet which is available under Produktinfo.Magnet-Schultz.com. Notes on the tables The force values indicated in the tables refer to 90 % of the rated 24 V, for other voltages deviations of magnetic voltage, (UN = force may occur) and in the normal operating temperature. Please make sure that the described devices are suitable for your application. Our offers for these devices are based on...

Dimension table Covered with protection varnish Tampoprint labelled Fig. 3: ype G HU Z 017 L20 A02 / A02 T push type (de-energized unlocked) ... A01 with impact damping ... A02 without impact damping Covered with protection varnish Tampoprint labelled Fig. 4: ype G HU Z 017 K20 A01 / A02 T pull type (de-energized locked) ... A01 with impact damping ... A02 without impact damping By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability reserved

Type code Designation Working method Impact damping with pull-type (de-energized locked) push-type (de-energized unlocked) with without Order example Type Voltage Operating mode Specials designs Please do not hesitate to ask for our assistance with the solution of your application-oriented task. In order to find rapidly a reliable solution we need complete details about your application conditions. The details should be specified as precisely as possible in accordance with the relevant -Technical Explanations. If necessary, please request the support of our corresponding technical office. Sales...