Magnetic body F HM G Function zz Magnetic body to be mounted on the suitable tube zz For ON/OFF and proportional solenoids zz Combination with hydraulic tubes, tubes for linear solenoids and locking devices zz High power density zz High corrosion protection Construction zz Electrical connection via various plugs zz Construction size: 37mm, 45mm, 63mm zz Protection class according to DIN VDE 470/DIN EN 60529, in case of proper assembly depending on plug type, from IP65 to IPX9K zz Corrosion protection / surface protection: Zn resp. ZnNi Application examples zz Hydraulic and mechanical applications Options and accessories zz Other plug forms as well as variants with cable zz Integrated recovery diode zz Deviant ambient and/or standard temperatures zz Variants according to ATEX/IECEx zz In the framework of our platform for valve solenoids there is a variety of variation possibilities for customer specific requirements. We are pleased to work out your individual solution in a personal meeting. Standards and approvals zz Design and testing according to DIN VDE 0580 zz Quality management to ISO 9001 zz UL approval for connector AMP-Junior-Timer and Deutsch DT04-2P U Magnet-Schultz GmbH & Co. KG • Allgäuer Straße 30 • D-87700 Memmingen • Tel. +49 83 31 10 40 • www.magne

Connector type Size (diameter) Protection class Preferred value rated voltage Maximum rated voltage with optional winding adaption Technical Data Rated voltage range for optional (VDC) winding adaption with UL approval Voltage supply requirements --Protective conductor connection Protection class when properly installed Surface Electrical equipment of protection class III may be only connected to low voltage systems (PELV, SELV)(IEC 60364-4-4-41). The design limit of the equipment is a rated voltage not higher than 120 V (EN 61140:2002) with DC. Inherent to their design, devices with detachable...

Performance data F HM G - Hydraulic applications - Proportional solenoid / ON/OFF solenoid Size Rated voltage UN ON/OFF solenoid Rated resistance R20 Proportional solenoid Weight The heating test is based on the assembly on a tube as well as a hydraulic slide with base plate and the minimum dimensions 1) hydraulic valve base plate The ambient temperature resp. reference temperature must not be exceeded by a heat input by an operating medium (e.g. oil). Table 2: Technical data hydraulic applications F HM G - Mechanical applications (dry) Size Operating mode Rated power P20 Reference temperature...

Dimensional drawings (plug: DIN) l2 Protective conductor connection Connector plug Circuit diagram with PE without PE By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply avail

Dimensional drawings (plug: AMP-Junior-Timer 2-pole) l2 Circuit diagram By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability rese

Dimension drawings size 063 l6 l7 As company Compagnie Deutsch Connector housing DT04-2P Connector pins 0460-202-16141 By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply

Examples of further magnetic bodies and customer-specific variants: Cable connection Bajonett - connector Kostal - connector Type F MM E 035 K01 A01 (ATEX / IECEx) Type F MM E 045 L02 A01 (ATEX / IECEx) Fig. 7: Magnetic body variants By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability reserved

Type code Designation Linear solenoid or Shotbolt Lock Unit Duty cycle (%) Heat dissipation via the valve part Rated voltage Ambient temperature range Connector type Proportional solenoid for hydraulic applications ON/OFF solenoid for hydraulic applications Example Designation: Voltage: Duty cycle: Specials designs Please do not hesitate to ask for our assistance with the solution of your application-oriented task. In order to find rapidly a reliable solution we need complete details about your application conditions. The details should be specified as precisely as possible in accordance with...