DC single-acting high performance solenoids Product group Function zz Push and pull type zz Increasing force vs. stroke characteristic Construction zz Central fastening zz Maintenance free bearings with high service life zz Insulation materials of the excitation winding correspond to thermal class F zz Electrical connection via connector plug type Z KB according to DIN EN 175301-803 zz Protection class according to DIN VDE/DIN EN 60529, when properly installed zz Electrical connection and solenoid body zz Receptacles according to DIN 46247 IP 00 zz Plug connection via connector plug IP65 zz Tube: IP20 Fig. 1 olenoid consisting of magnetic S body type F HM G and tube type F MT X Application examples zz Tooling machines, office machines, packing machines, textile machines zz Measuring and control technology Options zz Further electrical connections see data sheet F HM G and on request zz Please contact us for application related solutions zz ATEX-version see data sheet F MME + F MT X Standards zz Design and testing according to DIN VDE 0580 zz Quality management to ISO 9001 Magnet-Schultz GmbH & Co. KG • Allgäuer Straße 30 • D-87700 Memmingen • Tel. +49 83 31 10 40 • www.magnet-schultz.com

Technical data Size Operating mode  rel. duty cycle A rmature in stroke start position smax A rmature in stroke end position s0 Armature weight marmature * measured via switch-off energy (according to V1350.5786) Rated voltage The force values indicated in the tables refer to 90 % of the rated 24 V, for other voltages deviations of magnetic voltage, (UN = force may occur) and in the normal operating temperature. Rated voltage is 24 V. An adaptation of the exciter coil to a rated voltage less than 120 V is possible on request. Standard values for voltage and operating mode: 24V, S1 (100%). Due...

Plug connector in compliance with Circuit diagram Dimensions in mm / electrical data see table 1 d1 By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply ava

Tightening torque With attracted armature By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availabili

Single-acting solenoid complete Order description for complete unit please order pos. 10 + 20 Suitable socket wrench SW30 (12 kt DIN 3124) Tightening torque 6+1 Nm Suitable socket wrench SW38 (12 kt DIN 3124) Tightening torque 6+1 Nm Suitable socket wrench SW26 (12 kt DIN 3124) Tightening torque 5+1 Nm Supplied as tube compl. (included in Pos. 20) Order description for complete unit please order pos. 10 + 20 Supplied as tube compl. (included in Pos. 20) Order description for complete unit please order pos. 10 + 20 Supplied as tube compl. (included in Pos. 20) By edition of the present list, all...

Information and remarks concerning European directives can be taken from the correspondent information sheet which is available under Produktinfo.Magnet-Schultz.com. Please make sure that the described devices are suitable for your application. Our offers for these devices are based on the assumption of maximal 8 in an FMEA severity table, i. e. in case of malfunction of the device model as offered, there is, amongst others, no jeopardy of life or limb. Supplementary information concerning its proper installation can be taken also from the –Technical Explanation, the effective DIN VDE0580 as...