F HM G + F HT S
10Pages

ON/OFF solenoid for hydraulic application Product group Function zz Armature space pressure tight, nominal operating pressure up to 250 bar zz Magnetic force vs. stroke characteristic increasing zz Quick response times zz Push type Construction zz Electrical connection via various plugs zz Construction size: 35mm, 45mm, 60mm zz Protection class according to DIN VDE 470/DIN EN 60529, in case of proper assembly depending on plug type, from IP65 to IPX9K zz Mounting via central thread zz Simple exchange of the solenoid body without opening the hydraulic circuit zz Manual override Application examples zz Actuation of hydraulic and special valves Options and accessories zz Performance variants zz Deviant ambient and/or standard temperatures zz Other plug forms as well as variants with cable zz Variants according to ATEX/IECEx zz Integrated recovery diode zz In the framework of our platform for valve solenoids there is a variety of variation possibilities for customer specific requirements. We are pleased to work out your individual solution in a personal meeting. Standards and approvals zz Design and testing according to DIN VDE 0580 zz Quality management to ISO 9001 Magnet-Schultz GmbH & Co. KG • Allgäuer Straße 30 • D-87700 Memmingen • Tel. +49 83 31 10 40 • www.magnet-schultz.com Fig. 1: olenoid body type F HM G S with complete tube F HT S

Technical data standard Size Operating mode Reference temperature ϑ11 Rated voltage UN Nennbetriebsdruck (dynamisch) Rated work WN with working stroke sW Rated power P20 Operating frequency The heating test is based on the assembly on a hydraulic valve with base plate and the minimum dimensions hydraulic valve Information and remarks concerning European directives can be taken from the correspondent information sheet which is available under Produktinfo.Magnet-Schultz.com. Please make sure that the described devices are suitable for your application. Our offers for these devices are based...

Magnetic force-stroke characteristic standard Fig. 3: Magnetic force-stroke characteristic size 035 Fig. 4: Magnetic force-stroke characteristic size 045 Fig. 5: Magnetic force-stroke characteristic size 063 Standard values for voltage and operating mode: 24V, S1 (100%). For deviations from the indicated operating conditions regarding reference temperature, operating mode, rated voltage and dimensions of hydraulic slide and base plate, adaptions of the exciter coil might be necessary which result in modifications of the magnetic force. Solenoid interior and armature bearing are resistant to...

Solenoid body (connector: DIN) l3 Protective conductor connection Circuit diagram Dimensions in mm / electrical data see table 1 d1 By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply avail

Solenoid body (connector: AMP-Junior-Timer 2-pole) l2 Connector plug DIN EN 175301-803-A002M Circuit diagram Dimensions in mm / electrical data see table 1 d1 By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availability rese

Solenoid body (Deutsch-connector DT04-2P) l6 l7 As company Compagnie Deutsch Connector housing DT04-2P Connector pins 0460-202-16141 Dimensions in mm / electrical data see table 1 d1 By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply

Tube on/off solenoid With attracted armature manual override attraction force max 20 N depressurized tightening torque recess Tightening torque Admissible recess By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications and supply availabili

Connection geometry suitable o-ring By edition of the present list, all former unit lists lose their validity especially. Illustrations without guarantee – modifications

Valve solenoid complete electrical connection see page 4, 5, 6 Designation Solenoid body F HM G 037 Remark Order description for complete unit please order pos. 10 + 20 Alternative Order description for complete unit please order pos. 10 + 20 Suitable socket wrench SW26 (12 kt DIN 3124) Tightening torque 5+1 Nm 19x2,5 70 Sh-A NBR Order description for complete unit please order pos. 10 + 20 Alternative Order description for complete unit please order pos. 10 + 20 Supplied as tube compl. (included in Pos. 20) Suitable socket wrench SW30 (12 kt DIN 3124) Tightening torque 6+1 Nm 22x2,5 70...

Example Please note that for a functional unit always a combination of solenoid body and tube must be ordered. Solenoid body Rated voltage: Duty cycle Specials designs Please do not hesitate to ask for our assistance with the solution of your application-oriented task. In order to find rapidly a reliable solution we need complete details about your application conditions. The details should be specified as precisely as possible in accordance with the relevant -Technical Explanations. If necessary, please request the support of our corresponding technical office. Sales Terms applay,...