USB D������ G���� DS800S series DS10/25/50/100 series DT series + MT30

Specifications Model name Measuring range Maximum resolution Model name Mass (Probe) Instruction manual Communication Interface Recommended system specifications RAM: 1GB or more OS: Windows 7, Windows 10 (32bit/64bit) Gauge ⇔ Interpolator: 2m Interpolator ⇔ USB: 0.5m Steel ball tip with M2.5 thread Carbide ball tip with M2.5 thread Instruction manual, tightening nut, clamp spanner, wave washer, hose elbow, spanner Accessory Communication Interface Carbide ball tip with M2.5 thread Carbide ball tip with M2.5 thread Gauge ⇔ Interpolator: 2m Interpolator ⇔ USB: 0.5m CPU: Intel Core i3 or higher...

Specifications Model name Measuring range Easy to use MGSE USB software Maximum resolution Upward Measuring Horizontal force (at 20°C) Downward Only available through Magnescale Europe GmbH Spring push-out Pneumatic push 1.50 ± 0.80N Depending on unit to be connected Maximum response speed Reference point Spindle drive system Spring push-out Protection grade (connector not included) Operating temperature Pneumatic push IP64 or equivalent Storage temperature Power supply Power consumption Up to 8 gauges can be connected Free of cost Actual measurement values Calibration function Preset Scaling...

Safety Precautions: To use this product safely, please read the instruction manual carefully prior to usage. ● Magnescale reserves the right to change product specifications without prior notice. Magnescale Co., Ltd. International Sales Department 3-1-4 Edagawa, Koto-ku, Tokyo 135-0051, Japan E-mail: [email protected] 1 Technology Drive, Suite F217, Irvine, CA 92618, USA E-mail: [email protected] Magnescale Europe GmbH Antoniusstrasse 14, 73249 Wernau, Germany E-mail: [email protected] Service & Parts 45 Suzukawa, Isehara-shi, Kanagawa 259-1146, Japan E-mail: [email protected]...