1. Catalogs
  2. MAGNELAB
  3. SCT-3000 Split Core Current Transformer

SCT-3000 Split Core Current Transformer

SCT-3000 Split Core Current Transformer

Product catalog summary
Overview: The document provides technical specifications for the Magnelab SCT-3000 Series split-core AC current sensors, which are designed to measure AC current up to 3000 Amps. These sensors are suitable for installation on existing electrical wiring by snapping around the conductor.
Specifications:
  • Rated input: Up to 3000 Amps
  • Output: 0.333 Volt at rated current
  • Linearity accuracy: ± 1%
  • Accuracy range: 10% to 130% of rated current
  • Phase angle: Less than 2 degrees at 50% rated current
  • Frequency range: 50 Hz to 400 Hz
  • Lead: 8 ft. twisted-pair, 22 AWG
  • Maximum voltage: 600 V (on bare conductor)
  • Standards: UL Standard 61010-1, EN 60044-1
  • Operating temperature: -20°C to +110°C
Features:
  • Self-locking mechanism for easy installation
  • Custom outputs and parameters available upon request
  • No burden resistor required, with a Zener diode limiting output voltage to 22 V
Part Numbers and Ratings:
  • SCT-3000-000
  • SCT-3000-400: 400 Amp
  • SCT-3000-600: 600 Amp
  • SCT-3000-800: 800 Amp
  • SCT-3000-1000: 1000 Amp
  • SCT-3000-1200: 1200 Amp
  • SCT-3000-1500: 1500 Amp
  • SCT-3000-2000: 2000 Amp
  • SCT-3000-3000: 3000 Amp
Dimensions:
  • A: 146.05 mm (5.750 inches)
  • B: 190.50 mm (7.500 inches)
  • C: 30.48 mm (1.200 inches)
  • D: 76.20 mm (3.000 inches)
  • E: 127.00 mm (5.000 inches)
See more

Catalog excerpts

SCT-3000 Split Core Current Transformer-1

Split-Core AC Current Sensor SCT-3000 3.00” Opening With Ratings Up To 3000 Amps Description: Magnelab’s SCT-3000 Series split-core current sensors “sense” AC current up to 3000 Amps passing through the center conductor. Split-core transformers are ideal for installation on existing electrical wiring by snapping around the conductor. The SCT series have a self-locking mechanism. Custom outputs and other parameters are available at customer request. Output of 0.333 Volt at rated current Maximum Voltage: 600 V (on bare conductor) Accuracy at 10% to 130% of rated current Phase angle < 2 degrees measured at 50% rated current PART NUMBER AND RATING * Zener diode limits the output voltage to 22 V Output Voltage ONE TURN CUSTOMER SUPPLIED

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.