SCT-0750 Energy Management
SCT-0750 Energy Management
Magnelab’s SCT-0750 Series split-core current sensors are designed to sense AC current up to 200 Amps through the center conductor. These sensors are ideal for installation on existing electrical wiring due to their split-core design, which allows them to snap around the conductor. They feature a self-locking mechanism and can be customized for specific outputs and parameters upon request.
- Input rating up to 200 Amps.
- Output of 0.333 Volt at rated current.
- Linearity accuracy of ± 1%.
- Accuracy maintained from 10% to 130% of rated current.
- Phase angle less than 2 degrees for currents of 70A or higher.
- Operational frequency range from 30 Hz to 1,000 Hz.
- 8 ft. twisted-pair lead, 22 AWG.
- Maximum voltage of 600 V on bare conductor.
- Compliance with UL Standard 61010-1 and EN 60044-1.
- Operating temperature range from -20°C to +110°C.
- SCT-0750-000: No Burden Resistor*
- SCT-0750-005: 5 Amp
- SCT-0750-010: 10 Amp
- SCT-0750-020: 20 Amp
- SCT-0750-030: 30 Amp
- SCT-0750-050: 50 Amp
- SCT-0750-070: 70 Amp
- SCT-0750-100: 100 Amp
- SCT-0750-150: 150 Amp
- SCT-0750-200: 200 Amp
- A: 2.000 in / 50.80 mm
- B: 2.100 in / 53.34 mm
- C: 0.610 in / 15.49 mm
- D: 0.750 in / 19.05 mm
- E: 0.750 in / 19.05 mm
Magnelab reserves the right to modify products to make improvements without advance notice.
Catalog excerpts
Split-Core AC Current Sensor SCT-0750 0.75" Opening With Ratings Up To 200 Amps Description: Magnelab's SCT-0750 Series split-core current sensors "sense" AC current up to 200 Amps passing through the center conductor. Split-core transformers are ideal for installation on existing electrical wiring by snapping around the conductor. The SCT series have a self-locking mechanism. Custom outputs and other parameters are available at customer request. Features: • Inputs: Rated up to 200 Amp • Outputs: 0.333 Volt at rated current • Linearity accuracy ± 1% • Accuracy at 10% to 130% of rated current • Phase angle < 2 degrees (valid for 70A or higher) Operates from 30 Hz to 1,000 Hz 8 ft. twisted-pair lead, 22 AWG Maximum Voltage: 600 V (on bare conductor) UL Standard 61010-1, EN 60044-1 Operating temperature: -20°C to +110°C PART NUMBER AND RATING Magnelab reserves the right to modify products to make improvements without advance notice.
Open the catalog to page 1All MAGNELAB catalogs and technical brochures
RCT-2400-0001 Page
MGS-18002 Pages
HT800M1 Page
HT500M1 Page
HT300M Series1 Page
SCT-125W2 Pages
HCT-00241 Page
UCT-07501 Page
3304-xxx Series1 Page
SPT-03751 Page
RCS-18001 Page
RCT-180L1 Page
HCT-00101 Page
MGT-04202 Pages
SCT-12501 Page
SCT-125 series2 Pages
RCT-350T1 Page
RGS-07501 Page
- Dry transformer
- Current transformer
- IEC transformer
- Encapsulated transformer
- Isolation transformer
- DC current sensor
- Compact transformer
- Hall effect current sensor
- AC transformer
- Energy meter transformer
- Transformer for photovoltaic applications
- Split-core transformer
- Transformer current sensor
- Rogowski coil current sensor
- Solar transformer
- Voltage transducer