5 A Output Three-Phase RopeCT RCS-5A Series Rogowski Coils with 5 A RMS Current Output Integrator The RCS-5A Series integrator converts Magnelab RopeCT input voltage to 5 A AC RMS output. It was designed for use with any power meter or equipment with a 5 A current transformer input. The integrator ships with three RopeCTs and a 24 V DC power supply. An ideal replacement for bulky 5 A current transformers. SPECIFICATIONS Output Load 50 mQ Maximum (or 1.8 VA max.)* Inputs Selectable to 5,000 A with RopeCT Accuracy ±1.0% Full Scale Error Temperatures UL Rated Ambient: -20% to 55°C Leads 8ft, 600 V insulated leads (RopeCT to integrator). Suggest 18 AWG wire or larger (not included) for connecting 5 A AC output. Power Supply 24 V DC 40 Watt Din Rail , 0.9 A DC min. Lead wire included UL Max Voltage 600 V on bare conductor (RopeCT rating) RMS Voltage 10,000 V withstand (RopeCT rating) Certifications UL Listed, coforms to IEC 61010-1, (RopeCT meets IEEE C57.13, IEC 60044-1) Weight 3.57 lb (1.62 kg) in RCT-1800 Configuration Mounting DIN TS-35/7.5 or 15 (integrator + power supply) 12” DIN Rail + two stops provided * Important Note: RCS-5A Series integrator should be installed as close to the meter as possible to keep the load impedance under 50 mQ, because the lead resistance increases the impedance. APPLICATIONS • Submetering • Smart Home Energy Management System • Power Generation Monitoring • Industrial Pump Monitoring • Solar Consumption Monitoring • EV Charging Stations • Lifecycle Management of Equipment MODEL NUMBER cTOus C€ v6>HS2 IS09001 **Magnelab reserves the right to implement modifications without prior notice