ORBITAL WELD HEADS FOR FUSION WELDING OF TUBE Magnatech introduces an innovate solution to orbital tube welding with its modular EZ Orbital welding systems. The model 517 is a tube welding controller that integrates the operation of a standard, commercial GTAW power source with the weld head. The new line of weld heads, the 1000 series, with digital control of rotation speed regulation, ensuring perfect repeatability. Features WELDING CONTROLLER • Full color, touch screen operation • Intuitive symbol-based operation • Real time head temperature monitoring and over temperature alert • Visual display of welding cycle • Simple % adjustment of preset welding parameters • Diagnostic fault detection system (gas purge, weld head jam, etc) • Software updates and upgrades available by internet download via USB interface • Compact and lightweight controller built into waterproof rugged case WELD HEADS • Digital rotation motor ensures 100% repeatable speed regulation • Easy access collet clamp adjustment – optimal grip without deformation • Flip top viewing port – accurate pre-weld fit up inspection • Molded silicone switch panel on weld head handle – eliminates need for remote pendant • ndestructible SS hinge provides rigidity for I positive tube alignment • Collets for all tube sizes/fitting geometries • Internal water cooling standard – simply connect to a commercial water recirculator for high duty cycle applications Accessories • Extension cables allow use up to 12 m (40’) from power supply • Pre-ground tungsten electrodes • Waterproof carry case • Bench mount bracket

ORBITAL WELD HEADS FOR FUSION WELDING OF TUBE Magnatech introduces an innovate solution to orbital tube welding with its modular EZ Orbital welding systems. The model 517 is a tube welding controller that integrates the operation of a standard, commercial GTAW power source with the weld head. The new line of weld heads, the 1000 series, with digital control of rotation speed regulation, ensuring perfect repeatability. Features WELDING CONTROLLER • Full color, touch screen operation • Intuitive symbol-based operation • Real time head temperature monitoring and over temperature alert • Visual display...

OVER-CENTER CLAMPING USES SOLID COLLETS – NEVER NEEDS REPLACEMENT* *Patent Applied For Dimensions/weights HEAD MODEL 1030 Tube Diameter Range • Flush collets for minimal axial clamping length • Extended collets for maximum alignment capability Length x width x height Cable length 4.6 m (15’) standard. Extension cables available Power supply capability Consult factory for suitable models Input power requirements Metric and inch (selectable) Operating temperature Storage temperature Power source Pipe (tube) size Distance from nearest flush collet face to tungsten centerline. (Tungsten offset from...

OVER-CENTER CLAMPING USES SOLID COLLETS – NEVER NEEDS REPLACEMENT* *Patent Applied For Dimensions/weights HEAD MODEL 1030 Tube Diameter Range • Flush collets for minimal axial clamping length • Extended collets for maximum alignment capability Length x width x height Cable length 4.6 m (15’) standard. Extension cables available Power supply capability Consult factory for suitable models Input power requirements Metric and inch (selectable) Operating temperature Storage temperature Power source Pipe (tube) size Distance from nearest flush collet face to tungsten centerline. (Tungsten offset from...