Prospect TENSA-CRETE expansion joint type RE
4Pages

Add to favorites

{{requestButtons}}

Catalog excerpts

Expansion joints mageba expansion joints – for lasting driving comfort TENSA®CRETE Type RE and RE-LS easy to install, noise-reducing, durable Switzerland www.mageba.ch

Open the catalog to page 1

Expansion joints Features & Benefits Introduction The TENSA®CRETE type RE and RE-LS single-gap joint systems are expansion joints for gap widths up to 80 mm for the RE type and 100 mm for the RE-LS type (these values can vary depending on the construction standard). Type RE-LS is also equipped with a noisereducing surface in the form of “sinus plates”. This results in noise reduction of up to 80%. The steel edge profiles of the TENSA®CRETE expansion joints are anchored in ROBO®FLEX waterproof polymer concrete. The joints are suitable for new constructions as well as for refurbishment...

Open the catalog to page 2

Expansion joints Material properties & Installation The following high-quality materi- TENSA®CRETE expansion joints: • Steel profile made of S 235 grade • EPDM sealing profile • Polymer concrete consisting of epoxy resin, hardener and special mineral Corrosion protection The steel profiles are primed with anti- corrosion coating in accordance with ISO 12944 or the relevant national guidelines, such as ZTV-ING, ASTRA, RVS, ACQPA. The TENSA®CRETE expansion joint is 100% water-tight thanks to mageba's proven sealing profile. This sealing profile has been in use for decades, and is continu-...

Open the catalog to page 3

Expansion joints Quality characteristics & Consulting Quality Tenders Quotations Numerous single gap expansion joints using polymer concrete as a bonding material are already successfully in use under heavy traffic conditions. In addition to the excellent material properties of ROBO®FLEX concrete, decades of experience of mageba’s qualified personnel in the production and installation of the joints ensure the high quality and durability. mageba’s process-oriented quality assurance system is certified in accordance with ISO 9001/EN 29001. The following text elements can be used for the...

Open the catalog to page 4

All Mageba catalogs and technical brochures

1. 

   RESTON®SDD

   2 Pages

2. 

   RESTON®LINEAR

   2 Pages

3. 

   RESTON®POT LIFT-CONTROL

   4 Pages

4. 

   LASTO®BLOCK

   4 Pages

5. 

   RESTON®SPHERICAL

   4 Pages

6. 

   POLYFLEX®Advanced PU

   8 Pages

7. 

   TENSA®RAIL RSU

   2 Pages

8. 

   TENSA®MAT RM

   2 Pages

9. 

   TENSA®FINGER GF

   4 Pages

10. 

    Prospectus RESTON-PSD Preloaded Spring Damper

    4 Pages

11. 

    Prospectus RESTON-STU Shock Transmission Unit

    4 Pages

12. 

    Prospectus RESTON-PENDULUM seismic isolator "curved surface sliders"

    4 Pages

13. 

    Prospectus RESTON-SA shock absorbers

    4 Pages

14. 

    Prospect TENSA-FLEX RC sliding finger joints type RC

    4 Pages

15. 

    Prospect TENSA-FINGER RSFD cantilever finger joint type RSFD

    4 Pages

16. 

    Prospect TENSA-FINGER GF sliding finger joint type GF

    4 Pages

17. 

    Prospectus seismic isolators

    4 Pages

18. 

    Prospectus spherical bearing

    4 Pages

19. 

    Prospect Elastomeric bearings

    4 Pages

20. 

    Product brochure RESTON®POT

    4 Pages

21. 

    Prospect MIGUTEC

    72 Pages

22. 

    Prospect LASTO®STRIP

    6 Pages

23. 

    Prospect LASTO®WALL C

    4 Pages

24. 

    Product brochure TENSA®MODULAR LR and LR-LS

    8 Pages

25. 

    Product brochure ROBO®CONTROL "Permanent"

    4 Pages

26. 

    Product brochure TENSA®GRIP RS and RS-LS

    4 Pages